1998 Buick Riviera Owner's Manual

1998 Buick Riviera Owner's Manual 1998 Buick Riviera Owner's Manual

wpc.3cdd.edgecastcdn.net
from wpc.3cdd.edgecastcdn.net More from this publisher
11.07.2015 Views

44 (3): Press this button to reverse the tape rapidly.Press it again to return to playing speed. The radio willplay while the tape reverses.bb (4): Press this button to advance quickly to anotherpart of the tape. Press the button again to return to playmgspeed. The radio will play while the tape advances.SIDE (5): Press this button to change the side of thetape that is playing.RAND (6): Press this button to reduce backgroundnoise. The double-D symbol will appear in the displayDolby Noise Reduction is manufactured under a licensefrom Dolby Laboratories Licensing Corporation. Dolbyand the double-D symbol are trademarks of DolbyLaboratories Licensing Corporation.SOURCE: Press this button to change to the tape ordisc function when the radio is on. If both a tape and adisc are installed, the system will first go to tape play;TAPE SIDE and an arrow will appear on the display. IfSOURCE is pressed again, the system will go to discplay; CD PLAY will appear on the display.EJECT The system has two EJECT buttons. Pressthe button near the CD slot to remove a disc. Press thbutton near the tape slot to remove a tape and the radiwill play.3-13

CLN: If this message appears on the display, thecassette tape player needs to be cleaned. It will still playtapes, but you should clean it as soon as possible toprevent damage to the tapes and player. See “Care ofIf any error occurs repeatedly or if an error can’t becorrected, please contact your dealer. If your radiodisplays an error number, writedown and provide it toyour dealer when reporting the problem.Your Cassette Tape Player” in the Index. After you cleanPREV (1): Press this button to go to the start of thethe player, press and hold EJECT for five seconds tocurrent track, if more than eight seconds have played. Ifreset the CLN indicator. The radio will display --- toyou hold the button or press it more than once, theshow the indicator was reset.player will continue moving back through the disc. TheYour cassette tape player automatically ~~ lucessound will mute while seeking.background noise from tapes encoded wlm Dolby ~USC.NEXT (2): Press this button to go to the next track.Yau may turn Dolby off by pressing the number six preset.If you hold the button or press it more than once, thePlaying a Compact Discplayer will continue moving forward through the disc.The sound will mute while seeking.Insert a disc partway into the slot, label side up. Theplayer will pull it in. The disc should begin playing.The SEEK down and up arrows will also find theprevious and next selections on the disc.If you want to insert a CD while the ignition or the radiois off, first press EJECT or RECALL.44 (3): Press and hold this button to quickly reversewithin,a track. You will hear sound.If you’re dnving on a very rough road or if it’s very hot,the disc may not play and an error code may appear on (4): Press and hold this button to quickly advancethe display. When things get back to normal, the disc within a track. You will hear sound.should play. If the disc comes out, it could be that: RAND (6): Press this button to hear the tracks inrandom, rather than sequential, order. Press RANDagain to turn off random play,E20: The disc is upside down.E20: It is dirty, scratched or wet.0 E20: There’s too much moisture in the air.(Wait about an hour and try again.)

CLN: If this message appears on the display, thecassette tape player needs to be cleaned. It will still playtapes, but you should clean it as soon as possible toprevent damage to the tapes and player. See “Care ofIf any error occurs repeatedly or if an error can’t becorrected, please contact your dealer. If your radiodisplays an error number, writedown and provide it toyour dealer when reporting the problem.Your Cassette Tape Player” in the Index. After you cleanPREV (1): Press this button to go to the start of thethe player, press and hold EJECT for five seconds tocurrent track, if more than eight seconds have played. Ifreset the CLN indicator. The radio will display --- toyou hold the button or press it more than once, theshow the indicator was reset.player will continue moving back through the disc. TheYour cassette tape player automatically ~~ lucessound will mute while seeking.background noise from tapes encoded wlm Dolby ~USC.NEXT (2): Press this button to go to the next track.Yau may turn Dolby off by pressing the number six preset.If you hold the button or press it more than once, thePlaying a Compact Discplayer will continue moving forward through the disc.The sound will mute while seeking.Insert a disc partway into the slot, label side up. Theplayer will pull it in. The disc should begin playing.The SEEK down and up arrows will also find theprevious and next selections on the disc.If you want to insert a CD while the ignition or the radiois off, first press EJECT or RECALL.44 (3): Press and hold this button to quickly reversewithin,a track. You will hear sound.If you’re dnving on a very rough road or if it’s very hot,the disc may not play and an error code may appear on (4): Press and hold this button to quickly advancethe display. When things get back to normal, the disc within a track. You will hear sound.should play. If the disc comes out, it could be that: RAND (6): Press this button to hear the tracks inrandom, rather than sequential, order. Press RANDagain to turn off random play,E20: The disc is upside down.E20: It is dirty, scratched or wet.0 E20: There’s too much moisture in the air.(Wait about an hour and try again.)

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!