1998 Buick Riviera Owner's Manual
1998 Buick Riviera Owner's Manual 1998 Buick Riviera Owner's Manual
,Memory Seat and Mirrors (Option)To set your memory seat and mirrors:1. Adjust the driver’s seat cushion to your desiredposition. Adjust both outside mirrors to suit you. See“Mirrors” in the Index.When your vehicle is in PARK (P) with the ignition onor off, press the sane side of the MEMORY smitch torecall the seat and mirror-setting.To do the same thing for a second driver, fdow thepreceding steps, but press the other side of the ,.The memory function controls the driver’s seat cushion- MEMORY switch.ignition onor off, push EXIT and the seat will go all theway down and back.
Memory Seat and Mirrors Personal ChoiceFeature (Option)The transmitters can also be programmed to move thedriver’s seat and outside rnirrors to a set memoryposition when the transmitter’s UNLOCK buttonis pressed.To program the system:1. Adjust the driver’s seat cushion to a comfortableposition. Adjust both outside mirrors to suit you. See“Power Remote Control Mirror” in the Index.2. Press the SET button on the driver’s door armrest.You will hear one beep.3. Within five seconds, press one of the two memorybuttons on the armrest. You will hear two beeps toconfirm that the mirror and the seat positions areentered into memory.4. Press the UNLOCK button on the appropriatetransmitter within five seconds. You will heartwo beeps.The second transmitter can be programmed to recorda different seat and mirror position by following thesame steps.If you prefer to program the exit seat position, whichmoves the seat completely down and back, followthese steps:Press the SET button on the driver’s door armrest.You will hear one beep.Press the EXIT button on the armrest. You will hearone beep, but the seat will not move at this time.Press the UNLOCK button on the appropriatetransmitter within five seconds. You will heartwo beeps.This personal choice feature will work only when thevehicle is in PARK (P). A beep will sound inside thevehicle when the UNLOCK button on the transmitter ispressed to move the seat and mirrors.To turn this feature off, press SET and then UNLOCKwithin five seconds.
- Page 6 and 7: The 1998 Buick Riviera Owner’s Ma
- Page 8 and 9: How to Use this ManualMany people r
- Page 10 and 11: Vehicle SymbolsThese are some of th
- Page 12 and 13: Section 1 Seats and Restraint Syste
- Page 16 and 17: Heated Front Seat (Option)If your v
- Page 18: Head RestraintsSlide the head restr
- Page 21 and 22: Put someone on it.Get it up to spee
- Page 23 and 24: or the safety belts!With safety bel
- Page 25 and 26: 3. Pick up the latch plate and pull
- Page 27 and 28: If you move around in the vehicle e
- Page 29 and 30: e." What's wrong with this?UYou can
- Page 31 and 32: To unlatch the belt, just push the
- Page 33 and 34: AAir bags inflate with great force,
- Page 35 and 36: The right -front passenger’s air
- Page 37 and 38: When an air bag inflates, there is
- Page 39 and 40: Lap BeltIf your vehicle has a front
- Page 41 and 42: If the belt stops before it reaches
- Page 46 and 47: ChildrenEveryone in a vehicle needs
- Page 50: A rear-facing infant restraint (B)
- Page 58: Securing a Child Restraint in the C
- Page 61: 3. Pick up the latch plzate, and-fu
Memory Seat and Mirrors Personal ChoiceFeature (Option)The transmitters can also be programmed to move thedriver’s seat and outside rnirrors to a set memoryposition when the transmitter’s UNLOCK buttonis pressed.To program the system:1. Adjust the driver’s seat cushion to a comfortableposition. Adjust both outside mirrors to suit you. See“Power Remote Control Mirror” in the Index.2. Press the SET button on the driver’s door armrest.You will hear one beep.3. Within five seconds, press one of the two memorybuttons on the armrest. You will hear two beeps toconfirm that the mirror and the seat positions areentered into memory.4. Press the UNLOCK button on the appropriatetransmitter within five seconds. You will heartwo beeps.The second transmitter can be programmed to recorda different seat and mirror position by following thesame steps.If you prefer to program the exit seat position, whichmoves the seat completely down and back, followthese steps:Press the SET button on the driver’s door armrest.You will hear one beep.Press the EXIT button on the armrest. You will hearone beep, but the seat will not move at this time.Press the UNLOCK button on the appropriatetransmitter within five seconds. You will heartwo beeps.This personal choice feature will work only when thevehicle is in PARK (P). A beep will sound inside thevehicle when the UNLOCK button on the transmitter ispressed to move the seat and mirrors.To turn this feature off, press SET and then UNLOCKwithin five seconds.