made in italy - TAS - Tractor Automobile Spares

Replacement Spare Parts for INTERNATIONALMADE IN ITALY136720 H1 DIFF. SUN GEAR (20T.)136721 H1 DIFF. PLANET GEAR (16T.)138891 C1 T/M CASE REAR HOUSING138893 C1 T/M AUXILIARY DRIVE GEAR (32‐18T.)140946 R1 T/M THIRD SPEED GEAR (18‐23T.)140952 R1 T/M SECOND AND THIRD SPEED CLUTCH GEAR COLLAR (23T.)141295 H DIFF. GEAR AND PINION (9‐22)143182 R1 DIFF. SPUR PINION (13T.)143183 R1 DIFF. SPUR GEAR (44T.)144478 R92 DIFF. GEAR AND PINION (8‐39)146005 R1 T/M FOURTH AND FIFTH SPEED SYNCHRONIZER GEAR SNAP RING151393 C1 REAR WHEEL HUB BEARING NUT LOCKING WASHER154075 R1 T/M SECOND SPEED GEAR (33‐36T.)154076 R11 T/M THIRD SPEED GEAR (24T.)154077 R1 T/M COUNTERSHAFT GEAR (17‐27‐36‐43T.)154079 R1 T/M MAIN DRIVE GEAR (17‐27T.)157494 R1 DIFF. SIDE GEAR THRUST WASHER157563 R2 DIFF. SIDE GEAR (16T.‐20 SPLINES)158773 H1 BUSHING (50.8 X 60.3 X 50 MM.)160703 H1 DIFF. SUN GEAR (20T.)160704 H1 DIFF. PLANET GEAR (16T.)160854 M1 POWER TAKE OFF OUTPUT SHAFT161027 R2 DIFF. SIDE GEAR (16T.‐16 SPLINES)161042 R3 DIFF. PINION GEAR (9T.)161069 R3 DIFF. SPIDER161078 R2 DIFF. SIDE GEAR (16T.‐22 SPLINES)165795 R1 T/C IDLER SHAFT GEAR (28T.)165804 R1 T/C REAR OUTPUT SHAFT GEAR (27T.)169786 R1 DIFF. SIDE GEAR (16T.‐23 SPLINES)171014 R1 T/M MAINSHAFT171024 R1 T/M FOURTH SPEED GEAR SLEEVE171027 R1 T/M SECOND AND THIRD SPEED CLUTCH GEAR (19T.)171028 R1 T/M FIRST AND REVERSE SPEED SLIDING GEAR (45T.)171056 R1 T/M THIRD SPEED GEAR (40‐18T.)171060 R1 T/M COUNTERSHAFT THIRD SPEED GEAR (30T.)175865 H1 BUSHING (76.1 X 89 X 101.2 MM.)176547 H1 BUSHING 76.2 X 89 X 87.9 MM.)176573 H1 DIFF. SIDE GEAR (16T.‐19 SPLINES)176998 H1 BUSHING (63.4 X 76.2 X 75.7 MM.)177430 R1 T/M FIRST SPEED GEAR (48‐28T.)177434 R1 T/M THIRD SPEED GEAR SLEEVE177444 R1 T/M FIRST AND SECOND SPEED CLUTCH COLLAR (28 SPLINES)177445 R1 T/M FIRST AND SECOND SPEED CLUTCH GEAR (28T.)177446 R1 T/M THIRD AND FOURTH SPEED CLUTCH GEAR (26T.)179515 R1 STRG. GEAR SHAFT AND WORM ASSEMBLY181170 R1 DIFF. SIDE GEAR (18T.‐20 SPLINES)181519 R1 DIFF. HIGH SPEED CLUTCH PLATE THRUST WASHER182156 R91 T/M SECOND AND THIRD SPEED SYNCHRONIZER ASSEMBLY (19 SPLINES)182741 R1 T/C IDLER SHAFT LOW SPEED GEAR (34T.)185501 R1 T/M MAINSHAFT185503 R1 T/M SYNCHRONIZER SLIDING CLUTCH (28T.)TAS S.p.A. Head Office:Via Argine, 306 - 80147 Naples, Italyt.: +39 081 7520645 - f.: +39 081 7529475www.tas-spa.com4