Octopus Manual - LinPlug Virtual Instruments

EffectsThe Octopus has 4 independent, simultaneously-available stereo effectsmodules units. These are Chorus, Delay, Reverb and Equalizer. The foureffects units are located in the Effects module which is located towards thelower edge of the instrument's front panel.Effects processing occurs in a left-to-right order which means that thesignal path is as follows: Chorus -> Delay -> Reverb -> Equalizer.The Power button at the top left of each effects unit is used to set the unit'sstatus. This can be either On or Off. When the Effects unit is On, the Powerbutton has a yellow backlight, while when the Effects unit is Off the button'sbacklight is darkened. Clicking on the button switches the Effects unit onand off. When the effects unit is switched off audio passes through itwithout being processed.Each effect's controls differ. All effects are described in detail below.ChorusThe Chorus effect is located at the far left of the Effects module. This effectcan be used to thicken a single sound creating the impression that itcontains multiple voices. The Chorus works by mixing delayed signals withthe original signal. The Octopus's Chorus features controls for Time,Speed, Stereo, Dry, Wet and Invert.32 Manual