Octopus Manual - LinPlug Virtual Instruments

SamplerThe Octopus' Sampler module is located in the upper-left corner of theinstrument's Front Panel. If the Sampler module is not visible (that is, theOscillator Matrix is currently being displayed) it can be accessed by clickingon the Matrix/Sampler button located in the lower-right corner of themodule. This section of the manual describes the Sampler module. Forinformation about the Oscillator Matrix module please refer to its section inthis manual.The Octopus' Sampler module functions as an audio sampler playing backaudio files when triggered.Sampler SlotsThe Sampler module consists of 8 sample slots located on the left of themodule. Each slot can contain one audio sample. When a slot is empty it isdeactivated. This is indicated by its dark colour and the absence of asample name in the slot's display.Clicking on the "sample slot" opens the Load Sample dialog which enablessamples to be loaded into the currently selected slot. Once a sample isloaded into a slot, its name is displayed. To the right of the sample's nameis the Delete button ( Trash icon). Clicking on this button removes thesample from the selected slot.Each sample slot has the following controls: Low Key, Root Key, KBD TRK(Keyboard Tracking), USE LPS, F1/F2, PAN and MIX. These controls aredescribed below.12 Manual