Technical data sheet / brochure - Schuhputzmaschine.ch

Sole washer WET 600Sole cleaning unit16. TroubleshootingError- Brush doesnot rotate- No Water- NodisinfectantCause- Mains plug not plugged in- Safety push button defective- Transformer fuse has triggered- Motor too hot, thermostat hastriggered- Gate valve closed- Hose removed from nozzle- Hose defective- Solenoid valve fails to open- Storage tank empty- Suction hose not inserted downto base- Metering pump fails to run- Metering pump runs but nodeliverySolution- Plug in main power supply- Have button checked by qualified electrician;replace if necessary- Have it checked by qualified electrician- Have it checked by qualified electrician- Open gate valve (max. pressure 3 bar)- Make sure hose is fixed tightly to nozzle- Replace hose- Replace solenoid valve /notify Service- Fill up storage tank or replace (refer to7. Replacement of tank with disinfectant)- Insert suction hose down to base (refer to7. Replacement of tank with disinfectant)- Refer to 12. Fuse replacement in metering pump- Pump hose defective, replace / notify Service17. Spare parts (cf. fig. 9)Pos.Art. Nr.QuantityDescription1MG.03.2011Three-phasea.c. motor2SB.10.0221Metering pump3EM.01.0051Solenoid valve,G1/2“-24VAC4ES.09.4241Safety pushbutton5KG.01.0213 mHose,Di 6 x 1,5 mmFig. 9680.05.001.0531Disk brush,D 180 mmProduct specifications and designsubject to change without notice.