Atmel QTouch Library User Guide

Figure 5-16 : Specifying the QTouch acquisition method library configuration parametersin IAR IDEUsing the example projectsThe sample applications are shipped with the complete set of files required to configure, build,execute and test the application for both IAR-workbench and AVR Studio IDEs.The sample applications are provided for the evaluation kits and a few configurations for selectdevices. The user can use the sample applications as a reference or baseline to configuredifferent configurations. Please ensure to change the configuration settings in the project optionsto match the device selected.To change the configuration settings of the sample applications,1. Select the configuration from the list of configurations available.2. If the user wishes to have a new name for the configuration to be used, a newconfiguration can be added to the project.3. If a different variant of the library needs to be used, remove the existing library in thatparticular configuration and add the library variant that you require. Please refer to5.7.1.4 for details on the different library variants. Update the linker options to specifythe library to be linked.4. Specify the tunable configuration parameters for the project as illustrated in sections5.6.11.2.2 and 5.6.11.2.3.Example applications for QMatrix acquisition method librariesThe QMatrix acquisition method libraries include example projects for some of the supporteddevices. Example projects for both IAR IDE and AVR Studio IDE along with example applicationsare provided for select devices using the QMatrix acquisition libraries. These sample applicationsdemonstrate the usage of the touch API’s to add touch sensing to an application. Refer to thelibrary selection guide for details on the example projects and sample applications supported forthe release.73