Atmel QTouch Library User Guide

div uint16 t ATCFG0 DIVchlen uint8 t ATCFG0 CHLENselen uint8 t ATCFG0 SELENdishift uint8 t ATCFG1 DISHIFTsync uint8 t ATCFG1 SYNCspread uint8 t ATCFG1 SPREADdilen uint8 t ATCFG1 DILENmax uint16 t ATCFG1 MAXat_param touch_at_param_t Autonomous Touch Sensorparameters corresponding toATCFG2 and ATCFG3.FILTER, OUTSENS,SENSE, PTHR,PDRIFT, NDRIFTtouch_qt_reg_tstructureInput / OutputUsetouch_qt_reg_tInput to the libraryData structure which holds the Register configuration information for QTouchGroup A/B.Fields Type Corresponds to Register Register Fielddiv uint16 t TGxCFG0 DIVchlen uint8 t TGxCFG0 CHLENselen uint8 t TGxCFG0 SELENdishift uint8 t TGxCFG1 DISHIFTsync uint8 t TGxCFG1 SYNCspread uint8 t TGxCFG1 SPREADdilen uint8 t TGxCFG1 DILENmax uint16 t TGxCFG1 MAXtouch_qm_config_tstructureInput / OutputUsetouch_qm_config_tInput to the libraryData structure which holds all configuration information pertaining to QMatrixFields Type Commentnum_channels uint8_t Indicates the number of QMatrix channelsrequired by the usernum_sensors uint8_t Indicates the number of QMatrix sensorsrequired by the user.num_rotors_and_slidersuint8_t Indicates the number of QMatrix rotors /sliders required by the user.num_x_lines uint8_t Number of QMatrix X lines required by theuser.num_y_lines uint8_t Number of QMatrix Y lines required by theuser.num_x_sp uint8_t Number of X sense pairs used. This is aprivate variable to the Touch library. The usermust providePRIV_QM_NUM_X_SENSE_PAIRS for thisinput field.bl_write_count uint8_t Burst length write count. This is a private151