HP Integrated Lights-Out 2 User Guide
HP Integrated Lights-Out 2 User Guide
HP Integrated Lights-Out 2 User Guide
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Server name still present after ERASE utility is executedThe Server Name field is communicated to iLO 2 through the Insight Manager Agents.To remove the Server Name field after a redeployment of a server, do one of the following:• Load the Insight Manager Agents to update the Server Name field with the new server name.• Use the Reset to Factory Defaults feature of the iLO 2 RBSU utility to clear the Server Name field.This procedure clears all iLO 2 configuration information, not just the Server Name information.• Change the server name on the Administration>Access>Options page on the iLO 2 browserinterface.Troubleshooting a remote hostTroubleshooting a remote host server might require restarting the remote system. You can restart theremote host server by using the options listed in the Virtual Devices tab.Troubleshooting iLO 2 170
Change language