HP Integrated Lights-Out 2 User Guide

More documents

Recommendations

Info

management processor. If iLO 2 has not been configured to present a login challenge to the RBSU,no prompt will appear.4. Make and save any necessary changes to the iLO 2 configuration.5. Exit iLO 2 RBSU.Set up using the browser-based optionUse the browser-based setup method if you can connect to iLO 2 on the network using a browser. Youcan also use this method to reconfigure a previously configured iLO 2.Access iLO 2 from a remote network client using a supported browser, and provide the default DNSname, user name, and password. Default DNS name and account information is located on the iLO 2Network Settings tag attached to the server containing the iLO 2 management processor.When you successfully log onto iLO 2, you can change the default values of the local user accounts byselecting User Administration under the iLO 2 Administration tab.Activating iLO 2 licensed features using a browserThe Licensing page enables you to view the current license status and enter a key to activate iLO 2licensed features. See "Licensing (on page 22)" for more information on iLO 2 license options.1. Log in to iLO 2 through a supported browser.2. Click the Administration tab.3. Click Licensing to display the iLO 2 license activation screen.4. Enter the license key in the spaces provided. Press the Tab key or click inside a field to movebetween fields. The Activation Key field advances automatically as you enter data. Click Licensingto clear the fields and reload the page.5. Click Install. The EULA confirmation appears. The EULA details are available on the HP website(http://www.hp.com/servers/lights-out) and with the license kit.6. Click OK.The advanced features of iLO 2 are now enabled.iLO 2 setup 16
Install iLO 2 device driversThe iLO 2 Management Interface Driver enables system software such as SNMP Insight Agents and theTerminal Services Pass-Through service to communicate with iLO 2.The device drivers required to support iLO 2 are part of the PSP located on the SmartStart CD,Management CD, or on the HP website (http://www.hp.com/servers/lights-out).All the support drivers for your server and iLO 2 can be downloaded from the HP website(http://www.hp.com/servers/lights-out).To download the drivers:1. Click the iLO 2 graphic.2. Select Software and Drivers.Microsoft device driver supportThe device drivers that support the iLO 2 are part of the PSP that is located on the HP website(http://www.hp.com/support) or on the SmartStart CD. Before you install the Windows® drivers, obtainthe Windows® documentation and the latest Windows® Service Pack.iLO 2 prerequisite files:• CPQCIDRV.SYS provides the iLO 2 Management Interface Driver support.• CPQASM2.SYS, SYSMGMT.SYS, and SYSDOWN.SYS provide the iLO 2 Advanced ServerManagement Controller Driver support.PSP for Microsoft® Windows® products includes an installer that analyzes system requirements andinstalls all drivers. The PSP is available on the HP website (http://www.hp.com/support) or on theSmartStart CD.To install the drivers in the PSP:1. Download the PSP from the HP website (http://www.hp.com/support).2. Run the SETUP.EXE file included in the download, and follow the installation instructions.For additional information about the PSP installation, read the text file included in the PSP download.Linux device driver supportYou can download the PSP files containing the iLO 2 driver, the foundation agents, and health agentsfrom the HP website (http://www.hp.com/support). The instructions on how to install or update the iLO 2driver are available on the website. The HP Management Agents for Linux are:• ASM package (hpasm) which combines the health driver, IML viewer, foundation agents, healthagent, and standard equipment agent into one package.• RSM package (hprsm) which combines the RIB driver, rack daemon, RIB agent, and rack agent intoone package.To load the health and iLO 2 driver packages, use the following commands:rpm –ivh hpasm-d.vv.v-pp.Linux_version.i386.rpmrpm –ivh hprsm-d.vv.v-pp.Linux_version.i386.rpmwhere d is the Linux distribution and version andvv.v-pp are version numbers.For additional information, refer to the Software and Drivers website (http://www.hp.com/support).To remove the health and iLO 2 drivers, use the following commands:iLO 2 setup 17
Page 1 and 2: HP Integrated Lights-Out 2User Guid
Page 3 and 4: ContentsOperational overview ......
Page 5: Schema-free HPLOMIG-based setup ...
Page 9 and 10: iLO 2 overviewiLO 2 Standard provid
Page 11 and 12: functionality can be provided by va
Page 13 and 14: A separate network increases the se
Page 15: 4. Select Network>NIC>TCP/IP, press
Page 19 and 20: Configuring iLO 2In this sectioniLO
Page 21 and 22: 3. Click Upgrade iLO 2 Firmware.4.
Page 23 and 24: • Scripted virtual media• Apple
Page 25 and 26: 3. Click Add.4. Complete the fields
Page 27 and 28: Group administrationThe Group Accou
Page 29 and 30: Parameter Default value Description
Page 31 and 32: If the iLO 2 installation is comple
Page 33 and 34: 4. Verify that the iLO Management I
Page 35 and 36: Password guidelinesEncryptionThe fo
Page 37 and 38: By default, iLO 2 creates a self-si
Page 39 and 40: necessary security, the following c
Page 41 and 42: 10. Change Certificate Owner Field
Page 43 and 44: Owner Field is set to SAN, iLO 2 ob
Page 45 and 46: The test page displays the results
Page 47 and 48: To change network settings for iLO
Page 49 and 50: After iLO 2 resets, the Shared Netw
Page 51 and 52: 5. Navigate to the Virtual LAN ID f
Page 53 and 54: • Verify NSLOOKUP correctly resol
Page 55 and 56: On select p-Class blades in enclosu
Page 57 and 58: Subnet Mask—Assigns the subnet ma
Page 59 and 60: This configuration causes the iLO 2
Page 61 and 62: Using iLO 2In this sectioniLO 2 bro
Page 63 and 64: • Last Used Remote Console displa
Page 65 and 66: Temperaturesfan failure, some fan o
Page 67 and 68:
DiagnosticsThe iLO 2 processor reco
Page 69 and 70:
The status of these self-tests is i
Page 71 and 72:
Remote Console Information screenRe
Page 73 and 74:
Supported hot keysThe Program Remot
Page 75 and 76:
• Ctrl-Alt-Del—Enters the key s
Page 77 and 78:
Security informationIf Remote Conso
Page 79 and 80:
High-Performance Mouse option. You
Page 81 and 82:
Graceful shutdown• No—Server wi
Page 83 and 84:
Processor StatesSelecting the Proce
Page 85 and 86:
You can access virtual media on a h
Page 87 and 88:
Virtual Floppy and USB key drives d
Page 89 and 90:
3. Click Connect.To use an image fi
Page 91 and 92:
4. Click Create. The virtual media
Page 93 and 94:
Rack ViewThe Rack View page present
Page 95 and 96:
Enclosure informationEnclosure info
Page 97 and 98:
Power component informationSelectin
Page 99 and 100:
Enclosure bay IP addressingDuring t
Page 101 and 102:
Field Possible value DescriptionDNS
Page 103 and 104:
BL p-Class and BL c-Class featuresT
Page 105 and 106:
• Flexibility—You can create a
Page 107 and 108:
10. Select the certificate authorit
Page 109 and 110:
NOTE: When connected through the Di
Page 111 and 112:
Schema PreviewThe Schema Preview sc
Page 113 and 114:
Management snap-in installerThe man
Page 115 and 116:
Snap-in installation and initializa
Page 117 and 118:
d. Add users to the role. Click the
Page 119 and 120:
MembersAfter user objects are creat
Page 121 and 122:
Active Directory Lights-Out managem
Page 123 and 124:
e. Repeat the process for several m
Page 125 and 126:
Role managed devicesThe Role Manage
Page 127 and 128:
To remove any of the entries, highl
Page 129 and 130:
Directory-enabled remote management
Page 131 and 132:
How directory login restrictions ar
Page 133 and 134:
Using DNS-based restrictions can cr
Page 135 and 136:
• HP SIM can:• Manage multiple
Page 137 and 138:
• Windows® Server 2003• Novell
Page 139 and 140:
1. Click Start and select Programs>
Page 141 and 142:
This page determines if the HP Exte
Page 143 and 144:
• Role DN—The role distinguishe
Page 145 and 146:
NOTE: The feature associated with t
Page 147 and 148:
HP Systems Insight Manager integrat
Page 149 and 150:
Clicking on a status icon for iLO 2
Page 151 and 152:
Troubleshooting iLO 2In this sectio
Page 153 and 154:
LED indicatorPOST code(activitycomp
Page 155 and 156:
Event log displayEvent log explanat
Page 157 and 158:
The DHCP server must be configured
Page 159 and 160:
• The use of the diagnostic port
Page 161 and 162:
AlertFailed Login AttemptGeneral Er
Page 163 and 164:
2. On the Level of Privacy screen,
Page 165 and 166:
Terminal Services proxy stops respo
Page 167 and 168:
For example, when User1 logs in, th
Page 169 and 170:
1. Attempt to connect to iLO 2 thro
Page 171 and 172:
Directory services schemaIn this se
Page 173 and 174:
SyntaxOptionsRemarksDistinguished N
Page 175 and 176:
Lights-Out Management specific LDAP
Page 177 and 178:
DescriptionSyntaxOptionsRemarksLoca
Page 179 and 180:
Acronyms and abbreviationsACPIAdvan
Page 181 and 182:
HPONCFGHP Lights-Out Online Configu
Page 183 and 184:
RASremote access serviceRBSUROM-Bas
Page 185 and 186:
IndexAaccess options 23, 28, 33acce
Page 187 and 188:
memory 66Microsoft software 104, 11
Page 189:
virtual media 59, 84, 85, 87, 91, 1
show all

HP Integrated Lights-Out 2 User Guide

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?