HP Integrated Lights-Out 2 User Guide
HP Integrated Lights-Out 2 User Guide
HP Integrated Lights-Out 2 User Guide
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Event log displayEvent log explanationiLO 2 network link up Displays when the network is connected to iLO 2.iLO 2 network link downiLO 2 Firmware upgrade started by: <strong>User</strong>Host server reset by: <strong>User</strong>Host server powered OFF by: <strong>User</strong>Host server powered ON by: <strong>User</strong>Virtual Floppy in use by: <strong>User</strong>Remote Console login: <strong>User</strong>Remote Console ClosedFailed Console login - IP Address: IP addressAdded <strong>User</strong>: <strong>User</strong><strong>User</strong> Deleted by: <strong>User</strong>Modified <strong>User</strong>: <strong>User</strong>Browser login: <strong>User</strong>Browser logout: <strong>User</strong>Failed Browser login – IP Address: IP addressRemote Console login: <strong>User</strong>Remote Console ClosedFailed Console login – IP Address: IP addressAdded <strong>User</strong>: <strong>User</strong><strong>User</strong> Deleted by: <strong>User</strong>Event Log Cleared: <strong>User</strong>Power Cycle (Reset): <strong>User</strong>Virtual Power Event: <strong>User</strong>Security Override Switch Setting is OnSecurity Override Switch SettingChanged to OffOn-board clock set; was previously[NOT SET]"Logs full SNMP trap alert failed for: IP addressDisplays when the network is not connected to iLO2.Displays when a user starts a firmware upgrade.Displays when a user resets the host server.Displays when a user powers off a host server.Displays when a user powers on a host server.Displays when a user begins using a Virtual Floppy.Displays when a user logs on a Remote Consolesession.Displays when a Remote Console session is closed.Displays a failed console login and IP address.Displays when a local user is added.Displays when a local user is deleted.Displays when a local user is modified.Displays when a valid user logs on to iLO 2 usingan Internet browser.Displays when a valid user logs off iLO 2 using anInternet browser.Displays when a browser login attempt fails.Displays when an authorized user logs on using theRemote Console port.Displays when an authorized Remote Console useris logged out or when the Remote Console port isclosed following a failed login attempt.Displays when an unauthorized user hasfailed three login attempts using theRemote Console port.Displays when a new entry is made to theauthorized user list.Displays when an entry is removed from theauthorized user list. The <strong>User</strong> section displays theuser who requested the removal.Displays when the user clears the Event Log.Displays when the power has been reset.Displays when the Virtual Power Button is used.Displays when the system is booted with theSecurity Override Switch set to On.Displays when the system is booted with theSecurity Override Switch changed from On to Off.Displays when the on-board clock is set. Willdisplay the previous time or "NOT SET" if there wasnot a time setting previously.Displays when the logs are full and the SNMP trapalert failed for a specified IP address.Troubleshooting iLO 2 155
Change language