HP Integrated Lights-Out 2 User Guide

NOTE: HP Insight Agents for iLO 2 must be installed on the remote host server to enable management ofiLO 2. Refer to "Installing iLO 2 Device Drivers" for additional details about installing and configuringagents.HP SIM port matchingHP SIM is configured to start an HTTP session to check for iLO 2 at port 80. The port can be changed. Ifyou want to change the port number, you must also change it in Network Settings and HP SIM.To change the port number in HP SIM, add the port to the config\identification\additionalWsDisc.propsfile in the directory where HP SIM is installed. The entry must start with the HTTP port for iLO 2. No entryneeds to be in this file for iLO 2 if it remains at the standard Port 80. It is very important that the entry ison a single line and the port number is first, with all other items identical to the following example(including capitalization).The following example shows what the entry is if iLO 2 is to be discovered at port 55000 (this should allbe on one line in the file):55000=iLO2, ,true,false,com.hp.mx.core.tools.identification.mgmtproc.MgmtProcessorParserReviewing Advanced Pack license information in HP SIMHP SIM displays the license status of the iLO 2 management processors. You can use this information todetermine how many and which iLO 2 devices are licensed for the iLO Advanced Pack.To view license information, click Deploy>License Manager>Manage Keys. To be sure the data iscurrent, run the identify systems task for your management processors. Refer to the HP SIM documentationfor additional details about initiating tasks.HP Systems Insight Manager integration 150