HP Integrated Lights-Out 2 User Guide

More documents

Recommendations

Info

HPQLOMGC uses the scripting interface to send the directory settings to the management processor.3. The directory is updated.HPQLOMGC creates a device object in the directory at the location specified by the user.HPQLOMGC uses either the object name specified in the XML file or the network name of themanagement processor. After the device object is created, the specified role object is then amendedto include the newly created device object.Launching HPQLOMGC using application launchApplication Launch can be used to create tasks associated with administration of managementprocessors. For example, the management processors can be discovered using Application Launch andcould be used to automatically configure new management processors as they are added to the network.To create an Application Launch task:1. Click Device in the navigation bar on the top left side of the screen.2. Click Tasks to open the Tasks screen.3. Click New Control Task. A dropdown menu is displayed.4. Click Application Launch from the dropdown menu to open the Create/Edit Task screen.5. Enter the full path and name for the Lights-Out Migration Command Line Utility in the area provided.For example, if the HPQLOMGC.exe file is in the root directory of the C drive, then the path is:C:\HPQLOMGC.exe.6. Enter the parameters in the area provided.Command line switches enable you to designate items such as the management processor to beupgraded, the XML file to be used, and where a log file is generated.-S —This switch contains the IP address or DNS name of the managementprocessor. By default, the IP address of the management processor is automatically provided. Theenvironment variable can also be used to specify a network address.Use the -S switch to override the default behavior. If present, this switch has precedence over the IPaddress environment variable .-F —This switch contains the path of the XML file that has the management processordirectory settings and the location of the firmware images. This switch causes an error if an IPaddress is not designated.-A—This switch uses the network name for the name of the device object created in the directory.-V—This switch is optional and sets the HPQLOMGC to Verbose mode.-L —This switch defines where the log file is generated. This switch causes an error ifan IP address is not designated.-Q—This switch is optional and sets the HPQLOMGC to Quiet mode.7. Click Next. A screen is displayed with options for naming the task, defining the query association,and setting a schedule for the task.8. Enter a task name in the Enter a name for this task field.9. Select the query that had been created earlier, for example "Mgmt Processors."10. Click Schedule to define when the Application Launch task will run. A schedule configurationwindow is displayed.11. Click OK to set the schedule.NOTE: The default schedule for a control task is Now.12. Click Finish to save the Application Launch task.13. Click the Execute a Task icon (the green triangle) to execute the Group Administration.Lights-Out directories migration utilities 146
HP Systems Insight Manager integrationIn this sectionIntegrating iLO 2 with HP SIM ............................................................................................................... 147HP SIM functional overview ................................................................................................................... 147HP SIM identification and association..................................................................................................... 148Receiving SNMP alerts in HP SIM........................................................................................................... 149HP SIM port matching........................................................................................................................... 150Reviewing Advanced Pack license information in HP SIM.......................................................................... 150Integrating iLO 2 with HP SIMiLO 2 fully integrates with HP SIM in key operating environments. Full integration with Systems InsightManager also provides a single management console for launching a standard Web browser to access.While the operating system is running, you can establish a connection to iLO 2 using HP SIM.Integration with HP SIM provides:• Support for SNMP trap delivery to a HP SIM consoleDelivery to a HP SIM console can be configured to forward SNMP traps to a pager or e-mail.• Support for SNMP managementHP SIM is allowed to access the Insight Management Agents information through iLO 2.• Support for a management processorHP SIM adds support for a new device type, the management processor. All iLO 2 devices installedin servers on the network are discovered in HP SIM as management processors. The managementprocessors are associated with the servers in which they are installed.• Grouping of iLO 2 management processorsAll iLO 2 devices can be grouped together logically and displayed on one page. This capabilityprovides access to iLO 2 from one point in HP SIM.• iLO 2 hyperlinksHP SIM provides a hyperlink on the server device page to launch and connect to iLO 2.• HP Management AgentsiLO 2, combined with HP Management Agents, provides remote access to system managementinformation through the iLO 2 browser-based interface.HP SIM functional overviewHP SIM enables you to:• Identify iLO 2 processors.• Create an association between iLO 2 and its server.• Create links between iLO 2 and its server.• View iLO 2 and server information and status.HP Systems Insight Manager integration 147
Page 1 and 2:
HP Integrated Lights-Out 2User Guid
Page 3 and 4:
ContentsOperational overview ......
Page 5:
Schema-free HPLOMIG-based setup ...
Page 9 and 10:
iLO 2 overviewiLO 2 Standard provid
Page 11 and 12:
functionality can be provided by va
Page 13 and 14:
A separate network increases the se
Page 15 and 16:
4. Select Network>NIC>TCP/IP, press
Page 17 and 18:
Install iLO 2 device driversThe iLO
Page 19 and 20:
Configuring iLO 2In this sectioniLO
Page 21 and 22:
3. Click Upgrade iLO 2 Firmware.4.
Page 23 and 24:
• Scripted virtual media• Apple
Page 25 and 26:
3. Click Add.4. Complete the fields
Page 27 and 28:
Group administrationThe Group Accou
Page 29 and 30:
Parameter Default value Description
Page 31 and 32:
If the iLO 2 installation is comple
Page 33 and 34:
4. Verify that the iLO Management I
Page 35 and 36:
Password guidelinesEncryptionThe fo
Page 37 and 38:
By default, iLO 2 creates a self-si
Page 39 and 40:
necessary security, the following c
Page 41 and 42:
10. Change Certificate Owner Field
Page 43 and 44:
Owner Field is set to SAN, iLO 2 ob
Page 45 and 46:
The test page displays the results
Page 47 and 48:
To change network settings for iLO
Page 49 and 50:
After iLO 2 resets, the Shared Netw
Page 51 and 52:
5. Navigate to the Virtual LAN ID f
Page 53 and 54:
• Verify NSLOOKUP correctly resol
Page 55 and 56:
On select p-Class blades in enclosu
Page 57 and 58:
Subnet Mask—Assigns the subnet ma
Page 59 and 60:
This configuration causes the iLO 2
Page 61 and 62:
Using iLO 2In this sectioniLO 2 bro
Page 63 and 64:
• Last Used Remote Console displa
Page 65 and 66:
Temperaturesfan failure, some fan o
Page 67 and 68:
DiagnosticsThe iLO 2 processor reco
Page 69 and 70:
The status of these self-tests is i
Page 71 and 72:
Remote Console Information screenRe
Page 73 and 74:
Supported hot keysThe Program Remot
Page 75 and 76:
• Ctrl-Alt-Del—Enters the key s
Page 77 and 78:
Security informationIf Remote Conso
Page 79 and 80:
High-Performance Mouse option. You
Page 81 and 82:
Graceful shutdown• No—Server wi
Page 83 and 84:
Processor StatesSelecting the Proce
Page 85 and 86:
You can access virtual media on a h
Page 87 and 88:
Virtual Floppy and USB key drives d
Page 89 and 90:
3. Click Connect.To use an image fi
Page 91 and 92:
4. Click Create. The virtual media
Page 93 and 94:
Rack ViewThe Rack View page present
Page 95 and 96: Enclosure informationEnclosure info
Page 97 and 98: Power component informationSelectin
Page 99 and 100: Enclosure bay IP addressingDuring t
Page 101 and 102: Field Possible value DescriptionDNS
Page 103 and 104: BL p-Class and BL c-Class featuresT
Page 105 and 106: • Flexibility—You can create a
Page 107 and 108: 10. Select the certificate authorit
Page 109 and 110: NOTE: When connected through the Di
Page 111 and 112: Schema PreviewThe Schema Preview sc
Page 113 and 114: Management snap-in installerThe man
Page 115 and 116: Snap-in installation and initializa
Page 117 and 118: d. Add users to the role. Click the
Page 119 and 120: MembersAfter user objects are creat
Page 121 and 122: Active Directory Lights-Out managem
Page 123 and 124: e. Repeat the process for several m
Page 125 and 126: Role managed devicesThe Role Manage
Page 127 and 128: To remove any of the entries, highl
Page 129 and 130: Directory-enabled remote management
Page 131 and 132: How directory login restrictions ar
Page 133 and 134: Using DNS-based restrictions can cr
Page 135 and 136: • HP SIM can:• Manage multiple
Page 137 and 138: • Windows® Server 2003• Novell
Page 139 and 140: 1. Click Start and select Programs>
Page 141 and 142: This page determines if the HP Exte
Page 143 and 144: • Role DN—The role distinguishe
Page 145: NOTE: The feature associated with t
Page 149 and 150: Clicking on a status icon for iLO 2
Page 151 and 152: Troubleshooting iLO 2In this sectio
Page 153 and 154: LED indicatorPOST code(activitycomp
Page 155 and 156: Event log displayEvent log explanat
Page 157 and 158: The DHCP server must be configured
Page 159 and 160: • The use of the diagnostic port
Page 161 and 162: AlertFailed Login AttemptGeneral Er
Page 163 and 164: 2. On the Level of Privacy screen,
Page 165 and 166: Terminal Services proxy stops respo
Page 167 and 168: For example, when User1 logs in, th
Page 169 and 170: 1. Attempt to connect to iLO 2 thro
Page 171 and 172: Directory services schemaIn this se
Page 173 and 174: SyntaxOptionsRemarksDistinguished N
Page 175 and 176: Lights-Out Management specific LDAP
Page 177 and 178: DescriptionSyntaxOptionsRemarksLoca
Page 179 and 180: Acronyms and abbreviationsACPIAdvan
Page 181 and 182: HPONCFGHP Lights-Out Online Configu
Page 183 and 184: RASremote access serviceRBSUROM-Bas
Page 185 and 186: IndexAaccess options 23, 28, 33acce
Page 187 and 188: memory 66Microsoft software 104, 11
Page 189: virtual media 59, 84, 85, 87, 91, 1
show all

HP Integrated Lights-Out 2 User Guide

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?