HP Integrated Lights-Out 2 User Guide

NOTE: The feature associated with the Management Processor Password field is not available at this time.This field is provided for forward compatibility with future releases.HPQLOMGC operationThe command line utility is intended to be used in conjunction with HP SIM. If you are not using HP SIM,consider using the HPQLOMIG utility. The command line mode does not present a GUI and runsunattended. This mode is intended to work in conjunction with the Application launch functionality.IMPORTANT: Installing directory support for any management processor requires downloading the HPSmart Component. Refer to the "Pre-migration checklist" and the "HP Lights-Out directory package" sectionsfor additional information. Extending the schema must be completed by a Schema Administrator.To implement directory support on a few management processors.1. Use HP SIM to locate all of the management processors in the network.2. Execute the HPQLOMGC utility.3. Invoke the XML file to migrate the management processor.HPQLOMGC goes through three phases to complete the migration of a management processor.1. The firmware version is validated and updated if necessary.HPQLOMGC determines the type of management processor and the firmware level. If the firmwaredoes not meet the minimum requirement ("Upgrading firmware on management processors" on page139), HPQLOMGC upgrades the firmware and resets the management processor. After themanagement processor resets, HPQLOMGC begins the next phase.2. The management processor directory settings are updated.Lights-Out directories migration utilities 145