HP Integrated Lights-Out 2 User Guide

IMPORTANT: Installing directory support for any management processor requires downloading the HPSmart Component. Refer to the "Pre-migration checklist" and the "HP Lights-Out directory package" sectionsfor additional information. Extending the schema must be completed by a Schema Administrator.HPQLOMIG requires logon and upgrade firmware privileges for each management processor. Changedirectory setting privileges are required for directory services.Finding management processorsThe first step to migrating is to discover all management processors you want to enable for directoryservices. You can search for management processors using DNS names, IP addresses, or IP addresswildcards. The following rules apply to the variables entered in the Addresses field:• DNS names, IP addresses, and IP address wildcards must be delimited with a semicolon.• The IP address wildcard uses the "*" character in the third and fourth octet fields. For example, IPaddress 16.100.*.* is valid, whereas IP address 16.*.*.* is not.• Ranges can also be specified using a hyphen. For example, 192.168.0.2-10 is a valid range. Ahyphen is only supported in the rightmost octet.• After you click Find, HPQLOMIG begins pinging and connecting to port 443 (the default SSL port).The purpose of these actions is to quickly determine if the target network address is a managementprocessor. If the device does not respond to the ping or connect appropriately on port 443, then it isdetermined not to be a management processor.If you click Next, Back, or exit the application during discovery, operations on the current networkaddress are completed, but those on subsequent network addresses are canceled.To start the process of discovering your management processors:Lights-Out directories migration utilities 138