HP Integrated Lights-Out 2 User Guide

• TID10023209 How to configure LDAP for SSL (secure) connections• TID10075010 How to test LDAP authenticationSnap-in installation and initialization for eDirectoryRefer to "Snap-in installation and initialization ("Snap-in installation and initialization for Active Directory"on page 115)" for step-by-step instructions on using the snap-in installation application.NOTE: After the snap-ins are installed, ConsoleOne and MMC must be restarted to show the new entries.Example: Creating and configuring directory objects for use with LOM devices in eDirectoryThe following example shows how to set up roles and HP devices in a company called samplecorp, whichconsist of two regions, region1 and region2.Assume samplecorp has an enterprise directory arranged according to the following screen.1. Create organizational units in each region. Each organizational unit should contain the LOMdevices and roles specific to that region. In this example, two organizational units are created,called "roles" and "hp devices", in each organizational unit, "region1" and "region2".2. Create LOM objects in the hp devices organizational units for several iLO 2 devices using the HPprovided ConsoleOne snap-ins tool.a. Right-click the hp devices organizational unit found in the region1 organizational unit, andselect New>Object.b. Select hpqTarget from the list of classes, and click OK.c. Enter an appropriate name and surname in the New hpqTarget page. In this example, theDNS host name of the iLO 2 device, rib-email-server will be used as the name of the LOM object,and the surname will be RILOEII. Click OK. The Select Object Subtype page appears.d. Select Lights Out Management Device, and click OK.Directory services 122