HP Integrated Lights-Out 2 User Guide

NOTE: When connected through the Diagnostics Port, the directory server is not available. You can log inusing a local account only.Setting up directory servicesTo successfully enable directory-enabled management on any Lights-Out management processor:1. PlanReview the following sections:• "Directory services (on page 104)"• "Directory services schema (on page 171)"• "Directory-enabled remote management (on page 129)"2. Installa. Download the HP Lights-Out Directory Package containing the schema installer, the managementsnap-in installer, and the migrations utilities from the HP website(http://www.hp.com/servers/lights-out).b. Run the schema installer (on page 110) once to extend the schema.c. Run the management snap-in installer (on page 113), and install the appropriate snap-in for yourdirectory service on one or more management workstations.3. Updatea. Flash the ROM on the Lights-Out management processor with the directory-enabled firmware.b. Set directory server settings and the distinguished name of the management processor objects onthe Directory Settings page in the iLO 2 GUI.4. Managea. Create a management device object and a role object ("Directory services objects" on page117) using the snap-in.b. Assign rights to the role object, as necessary, and associate the role with the management deviceobject.c. Add users to the role object.For more information on managing the directory service, refer to "Directory-enabled remotemanagement (on page 129)." Examples are available in the "Directory services for Active Directory(on page 113)" and "Directory services for eDirectory (on page 121)" sections.5. Handle exceptions• Lights-Out migration utilities are easier to use with a single Lights-Out role. If you plan to createmultiple roles in the directory, you might need to use directory scripting utilities, like LDIFDE or VBscript, to create complex role associations. Refer to the "Using bulk import tools (on page 134)"for more information.• If you have iLO 2 or RILOE processors with old firmware, you might need to manually update thefirmware using a browser. Minimum firmware requirements for remote firmware update usingRIBCL and directory migration utility are:LOM productRILOE 2.41RILOE IIiLO 1.4xiLO 2 1.1xMinimum supported firmwareAll versionsDirectory services 109