HP Integrated Lights-Out 2 User Guide

10. Select the certificate authority listed. (It is the same CA defined during the Certificate Servicesinstallation.) Click Next.11. Click Finish to close the wizard.Schema-free browser-based setupSchema-free can be setup using the iLO 2 browser-based interface.1. Log on to iLO 2 using an account that has the Configure iLO 2 Settings privilege. ClickAdministration.IMPORTANT: Only users with the Configure iLO 2 Settings privilege can change these settings. Users thatdo not have the Configure iLO 2 Settings privilege can only view the assigned settings.2. Click Directory Settings.3. Select Use Directory Default Schema in the Authentication Settings section. For moreinformation, refer to the "Schema-free setup options (on page 107)" section.4. Click Apply Settings.5. Click Test Settings.Schema-free scripted setupTo setup the schema-free directories option using RIBCL XML scripting:1. Download and review the scripting and command line resource guide.2. Write a script that configures iLO 2 for schema-free directories support and run it. The followingscript can be used as a template.Schema-free HPLOMIG-based setupHPLOMIG is the easiest way to set up a large number of LOM processors for directories. To useHPLOMIG, download the HPQLOMIG utility and additional documentation from the HP website(http://www.hp.com/servers/lights-out). HP recommends using HPLOMIG when configuring many LOMprocessors for directories. For more information on using HPLOMIG, refer to the "HPLOMIG Operation"section.Schema-free setup optionsSetup options are the same regardless of which method (browser, HPQLOMIG, or script) you use toconfigure the directory.After enabling directories and selecting the Schema-free option, you have the following options.Directory services 107