MSDS - Mohawk Finishing

Product Name:Material Safety Data SheetDESIGNER SERIES STAIN CINNAMON GALTarget Organs:kidneys, lungsCarcinogenicity:This product contains carcinogens or potential carcinogens as listed by IARC or NTP.Hazardous Listing:Components of this product are considered hazardous per the OSHA Hazard Communication Standard (29 CFR1910.1200).Section 3: Composition/Information on Ingredientsaromatic hydrocarbons1,2,4-trimethylbenzeneiron oxide redalkyd resin solidsaromatic hydrocarbonsaliphatic petroleum distillatesferric oxiden-butyl acetatecalcium carbonatenaphthalenem-xylenealkyd resincumenealiphatic petroleum distillatessoy lecithinwaterethanolproprietary solidscrystalline silicacarbon blacko-xyleneiron oxide yellowfumed silicaethylbenzenep-xyleneChemical CAS Percent Composition64742-95-695-63-61332-37-2proprietary NCP64742-94-564742-47-81317-60-8123-86-41317-65-391-20-3108-38-366070-60-898-82-864742-88-78030-76-07732-18-564-17-5proprietary14808-60-71333-86-495-47-651274-00-1112945-52-5100-41-4106-42-330 - 5010 - 2010 - 201 - 101 - 101 - 101 - 101 - 101 - 10< 1< 1< 1< 1< 1< 1< 1< 1< 1< 1< 1< 1< 1< 1< 1< 1Section 4: First Aid MeasuresEye Contact:If exposure occurs, flush the affected eye for at least 20 minutes. Tilt the head to prevent chemical from transferring to theuncontaminated eye. Seek medical attention immediately after flushing.EHS Review/Issue Date: 05/08/2012Page 2 of 9File:IM547-54027_MSDS_ENGUSA_002.pdf

Product Name:Material Safety Data SheetDESIGNER SERIES STAIN CINNAMON GALIngestion:Do not induce vomiting. Dilute with water or milk. Never give fluids if the victim is unconscious or having convulsions. Seekmedical attention immediately.Skin Contact:If exposure occurs, flush the affected area thoroughly with water for at least 15 minutes. Destroy contaminated clothing and shoes.Seek medical attention immediately.Inhalation:Remove to fresh air. If not breathing, administer CPR until help arrives or the victim starts to breathe on his own. If breathing isdifficult, give oxygen. Seek medical attention immediately.Section 5: Fire Fighting MeasuresExtinguishing Media:Use alcohol foam, dry chemical, carbon dioxide or any Class B fire extinguishing agent. Water may be unsuitable for extinguishingfires. Water may be used to cool and prevent the rupture of containers that are exposed to the heat from a fire.Products of Combustion:Combustion may produce carbon monoxide, carbon dioxide, and irritating or toxic vapors and gases.Protection of Firefighters / Explosion Hazards:Rags, steel wool or waste soaked with product may spontaneously catch fire if improperly discarded. Immediately after each use,place rags, steel wool or waste in a sealed, water-filled metal container. Evacuate all persons from the fire area to a safe location.Move non-burning material, as feasible, to a safe location as soon as possible. Fire fighters should be protected from potentialexplosion hazards while extinguishing the fire. Wear self-contained breathing apparatus (SCBA) and full fire-fighting protectiveclothing. Thoroughly decontaminate all protective equipment after use. Containers of this material may build up pressure if exposedto heat (fire). Use water spray to cool fire-exposed containers. Use water spray to disperse vapors if a spill or leak has not ignited.DO NOT extinguish a fire resulting from the flow of flammable liquid until the flow of the liquid is effectively shut off. Thisprecaution will help prevent the accumulation of an explosive vapor-air mixture after the initial fire is extinguished.Section 6: Accidental Release MeasuresFollow personal protective equipment recommendations found in Section 8. Personal protection needs must be evaluated based oninformation provided on this sheet and the special circumstances created by the spill including; the material spilled, the quantity ofthe spill, the area in which the spill occurred, and the training and the expertise of employees in the area responding to the spill.Never exceed any occupational exposure limits. Shut off ignition sources; including electrical equipment and flames. Do not allowsmoking in the area. Do not allow the spilled product to enter public drainage systems or open waterways.EHS Review/Issue Date: 05/08/2012Page 3 of 9File:IM547-54027_MSDS_ENGUSA_002.pdf

Product Name:Material Safety Data SheetDESIGNER SERIES STAIN CINNAMON GALSection 7: Handling and StorageHandling:Empty containers may retain product residue or vapor. Do not pressurize, cut, weld, braze, solder, drill, grind, or expose container toheat, flame, sparks, static electricity, or other sources of ignition.Storage:Keep containers closed when not in use. Store in cool well ventilated space away from incompatible materials.Section 8: Exposure / Personal ProtectionOSHA 29 CFR 1910.1000 Air Contaminants – Tables:ChemicalCASZ-1 PEL(units as noted)Z-2 PEL(PPM)Z-3StatusSpecificallyRegulated see:ACGIH TLV(units as noted)aromatic hydrocarbons64742-95-61,2,4-trimethylbenzeneiron oxide redalkyd resin solidsaromatic hydrocarbons95-63-61332-37-2proprietary NCP64742-94-525 PPMaliphatic petroleum distillates64742-47-8ferric oxide1317-60-8n-butyl acetatecalcium carbonatenaphthalenem-xylenealkyd resincumenealiphatic petroleum distillatessoy lecithinwaterethanolproprietary solids123-86-41317-65-391-20-3108-38-366070-60-898-82-864742-88-78030-76-07732-18-564-17-5proprietary710 MGM3 (150 PPM)50 MGM3 (10 PPM)435 MGM3 (100 PPM)245 MGM3 (50 PPM)1900 MGM3 (1000 PPM)15 MGM3150 PPM10 PPM100 PPM50 PPM1000 PPMcrystalline silicacarbon blacko-xyleneiron oxide yellow14808-60-71333-86-495-47-651274-00-1435 MGM3 (100 PPM)3.5 MGM3*100 PPM0.025 MGM33.5 MGM3fumed silicaethylbenzenep-xylene112945-52-5100-41-4106-42-3435 MGM3 (100 PPM)435 MGM3 (100 PPM)100 PPM100 PPMEHS Review/Issue Date: 05/08/2012Page 4 of 9File:IM547-54027_MSDS_ENGUSA_002.pdf

Product Name:Material Safety Data SheetDESIGNER SERIES STAIN CINNAMON GALEngineering Controls:Use adequate ventilation to maintain airborne concentrations at levels below permissible or recommended occupational exposurelimits.Eye / Face Protection:Wear chemical-resistant glasses and/or goggles and a face shield when eye and face contact is possible due to splashing or sprayingof material.Skin Protection:Wear chemical resistant footwear and clothing such as gloves, an apron or a whole body suit as appropriate.Respiratory Protection:A NIOSH-approved air-purifying respirator with the appropriate cartridge may be appropriate under certain circumstances whereairborne concentrations are expected to exceed permissible exposure limits. Protection provided by air-purifying respirators islimited. Use a positive-pressure, air supplied respirator if there is potential for an uncontrolled release, exposure levels are notknown or any other circumstances where air-purifying respirators may not provide adequate protection.General Hygiene Considerations:It is good practice to avoid contact with the product and/or its vapor, mists or dust by using appropriate protective measures.Wash thoroughly after handling and before eating or drinking.Section 9: Physical and Chemical PropertiesPhysical State:Odor:Odor Threshold:pH:Freezing Point:Boiling Point:Flash Point ( o F):Evaporation Rate:Flammability (solid, gas):Upper Flammability Limit:Lower Flammability Limit:Vapor Pressure:Vapor Density:Colored LiquidOily HydrocarbonNot determined.Not determined.Not determined.Not determined.105 (CALC.)Not determined.Not determined.Not determined.Not determined.Not determined.Not determined.EHS Review/Issue Date: 05/08/2012Page 5 of 9File:IM547-54027_MSDS_ENGUSA_002.pdf

Product Name:Material Safety Data SheetDESIGNER SERIES STAIN CINNAMON GALSpecific Gravity:Weight per Gallon (lbs):Solubility (water):Partition Coefficient (n-octanol/water):Auto-ignition Temperature:Coating VOC g/l:Coating VOC lbs/gal:Material VOC g/l:Material VOC lbs/gal:Solids VOL%:Solids WT %:1.038.56Not determined.Not determined.Not determined.733.146.1730.236.0815.428.35Contains Photochemically Reactive Solvent.VOC data per US EPA guidelines. Some states and localities have guidelines more stringent than federal regulations.Aerosol coating product category codes and applicable reactivity limits are displayed on product labels per 40 CFR 59.507.Section 10: Stability and ReactivityStability:Stable under normal conditions.Conditions to Avoid/Incompatible Materials:Keep away from heat, sparks and flames.Hazardous Decomposition Products:Not determined.EHS Review/Issue Date: 05/08/2012Page 6 of 9File:IM547-54027_MSDS_ENGUSA_002.pdf

Product Name:Material Safety Data SheetDESIGNER SERIES STAIN CINNAMON GALSection 11: Toxicology InformationChemical CAS IARC NTParomatic hydrocarbons 64742-95-61,2,4-trimethylbenzene95-63-6iron oxide red1332-37-2alkyd resin solidsproprietary NCParomatic hydrocarbons 64742-94-5aliphatic petroleum distillates 64742-47-8ferric oxide 1317-60-8n-butyl acetate 123-86-4calcium carbonate1317-65-3naphthalene91-20-3 *m-xylene108-38-3alkyd resin66070-60-8cumene98-82-8aliphatic petroleum distillates64742-88-7soy lecithin8030-76-0water7732-18-5ethanol64-17-5**proprietary solidsproprietarycrystalline silica14808-60-7*carbon black1333-86-4o-xylene95-47-6iron oxide yellow51274-00-1fumed silica112945-52-5ethylbenzene100-41-4p-xylene106-42-3Toxicological evaluation of this product as a whole has not been performed. Individual components that are potential or knowncarcinogens are listed above.Section 12: Ecological InformationEcological evaluation of this material has not been performed; however, do not allow the product to be released to theenvironment without governmental approval/permits.EHS Review/Issue Date: 05/08/2012Page 7 of 9File:IM547-54027_MSDS_ENGUSA_002.pdf