mig welding - Rapid Welding and Industrial Supplies Ltd

OXY/FUEL CUTTINGTwin-Outlet Hose ValvesThese Twin-outletvalves let you connecttwo sets of hoses andtorch equipment to a singlegas inlet, in order to use asingle set of bottles, regulatorsand flashback arrestors.With independent adjustment knobs, you cancontrol the flow of gas from each outletindividually. 3/8” BSP fitting versions areavailable with Right Hand or Left Hand threads.Product Price Per UnitArt #Exc. VATDA8003838YRH RH - (e.g Oxygen) 27.34DA8003838YLH LH - (e.g Acetylene) 27.34Twin-Outlet Valves FBA VersionThese Twin-outlet valves letyou connect two sets ofhoses, flashback arrestors andtorch equipment to a singlegas inlet, in order to use asingle set of bottles and regulators.With independent adjustmentknobs, you can control the flow ofgas from each outlet individually.3/8” BSP fitting versions are availablewith Right Hand or Left Hand threads.Product Price Per UnitArt #Exc. VATDA8003838YRHFBA RH - (e.g Oxygen) 41.15DA8003838YLHFBA LH - (e.g Acetylene) 41.15Fine Adjustment ValvesUsed in series within a gas line,the fine adjustment valves aredesigned to allow the isolationand flow control of gastravelling through a hose.Available in Right-Hand (RH)and Left-Hand (LH) versions, the fineadjustment valves consist of a 3/8” BSPthreaded female fitting and a 3/8” BSPthreaded male nut, situated either side of aflow control valve and an adjustment knob.Product Price Per UnitArt #Exc. VATDA800RH RH - (e.g Oxygen)20.44DA800LH LH - (e.g Acetylene)20.44CO2 Regulator NutCO2 cylinders have a male outlet andthe CO2 regulator connects to it via a nut,which can become damaged over time fromthe wear and tear of changingbottles. This damage can causeleaks at the connection, so theregulator nuts are often replaced.Art #ProductPrice Per UnitExc. VATDACO2NUT CO2 Regulator Nut5.12Regulator Bullnose StemsRegulator bullnose stems can becomedamaged over time from general wear andtear incurred when changing bottles. Thisdamage can cause leaks at the cylinderconnection, so bullnose stems and /or regulator nuts are often replaced.Our bullnose stems are available in severalregulator thread sizes to suit differentpopular regulator manufacturers.Product Price Per UnitArt #Exc. VATDASTEM12 Reg Stem 1/2x27TPI UK 7.49DASTEM14 Reg Stem 1/4NPT UK 7.49DASTEM26 Reg Stem 1/2x26TPI UK 7.49DASTEMCO2 Reg Stem CO2 UK 7.14DASTEMLX Reg Stem5.57Regulator NutsRegulator nuts can become damaged overtime from general wear and tear incurredwhen changing bottles. This damage cancause leaks at the bullnose, soregulator nuts and / or bullnosestems are often replaced.www.RapidWelding.comOur regulator nuts are 5/8” BSP,available in LH and RH versions.Product Price Per UnitArt #Exc. VATDANUTLH 5/8” BSP Reg Nut LH UK 8.67DANUTRH 5/8” BSP Reg Nut RH UK 8.67DANUTLHLX 5/8” BSP Reg Nut LH 8.63DANUTRHLX 5/8” BSP Reg Nut RH 8.63Replacement of regulator partsshould only be undertaken bya trained professional.05Order Before 4pm For NextDay Delivery (Mon-Fri)