mig welding - Rapid Welding and Industrial Supplies Ltd

TIG WELDINGSingle-Stage 1- Gauge RegThis simple regulator is designed toallow basic control of shielding gasflow and to indicate bottlecontents. It has a 5/8” BSP inletfitting and a 3/8” BSP outlet fitting,for use with either an argon ormixed Ar/CO2 gas cylinder.Pressure can be set via markings on knob.Bottle contents shown on gauge.An economical option, where accuracy isn’tessential. A flowmeter can be attached.Art #ProductPrice Per UnitExc. VATAE2005W 1-Stage 1-Gauge Argon Reg 74.66Pre-Set 1 Gauge RegCommonly used with a flowmeter toprovide greater control over theshielding gas flow. Pre-set to 2bar, with no pressure adjustmentknob, this model displays bottlecontents, on gauge. 3/8” BSP RHoutlet. Owing to the single-stagenature of this regulator, outputpressure can fluctuate as bottle contents drop.For greater accuracy use a multi-stage reg.Art #ProductPrice Per UnitExc. VATAE2005WPS 1S 1G Pre-Set Argon Reg 74.66Shielding Gas EconomiserProven to reduce the unnecessary loss ofshielding gas by up to 50%. The shielding gaseconomiser works by quickly closing its valvewhen welding stops and reducing the amountof gas that is lost through the torch. Theeconomiser is shipped calibrated with a flowrate of 8Ltr/min but can be adjusted via anallen key fitting in the base.Sold as a package, includinga flow tube and a universalhose tail & nut combinationthat suits 3/8” BSP and 1/4”BSP fittings. The flow tube isalso available separately.Art #ProductPrice Per UnitExc. VATMW15210 Gas Economiser69.07MW15220 Gas Flow Tube7.53Multi-Stage 2-Gauge RegsDesigned to allow control ofshielding gas flow and providemore accuracy and controlover pressure. 5/8” BSP inletfitting and a 3/8” BSP outlet.Models are available to suit argonand helium (often used whenwelding aluminium). One gaugeshows pressure, the other showsbottle contents. 300 bar service. 7 bar output.Product Price Per UnitArt #Exc. VATAE7005W 2-Stage, 2-Gauge Argon Reg 141.22AE7010W 2-Stage, 2-Gauge Helium Reg 155.35FlowmeterDesigned to be fitted to the outletof an argon or CO2 regulator to providegreater control of the flow of yourshielding gas through the gas line.Ideal for use in MIG and TIG. 2models are available, with either0-15LPM or 0-40LPM flow rate.Art #AU200 Flowmeter 0-15 LPM28.25AU300 Flowmeter 0-40 LPM30.91Leak Detection SprayNon-toxic milky spray in a 400ml can.Use on hoses, regulator nuts, shankvalves, headnuts, etc..Art #ProductProductPrice Per UnitExc. VATEG3001 Leak-Tek Spray3.36TIG welding has become apopular choice of process formany fabricationapplications, especially onstainless steel andaluminium, because of thehigh weld integrity and finishquality which can beachieved. TIG is also usedheavily in pipeline installationand repair work, and we nowoffer a complete range ofpipe tools for use in suchtasks - see pages 76 - 79.Price Per UnitExc. VATwww.RapidWelding.com43Order Before 4pm For NextDay Delivery (Mon-Fri)