mig welding - Rapid Welding and Industrial Supplies Ltd

MIG WELDINGConversion KitA kit for converting the Quick-Connector fitting typicallyfound on our range of miniMIG welders for connectionto an industrial bottleregulator. Complete thepackage by adding a 1/4”(6mm) hose tail and a suitablehose nut, listed on page 8.Art #ProductTWN001 Conversion Kit23.52Mini Gas RegulatorThe mini gas regulator features a 1/8”BSP inlet bottle fitting and a quickconnector outlet. It is used withdisposable gas cylinders on smallMIG and TIG machines, but canalso be used with the ConversionKit to adapt the quick-connector foruse with the 3/8” BSP fitting typicallyfound on industrial welding machines.Art #ProductPrice Per UnitExc. VATPrice Per UnitExc. VATTWN722120 Mini Gas Regulator25.74Shielding Gas RegulatorsDesigned to step down andallow control of gas flow, theseregulators are for use with Argonor CO2 shielding gas in MIG andTIG welding applications. Theyfeature 3/8” RH BSP outlet and5/8” BSP RH inlet fittings.Versions are available in singlestageone- and two- gauge (with 3.5 or 10 barmaximum outlets), plugged, or multi-stage 2gauge designs.Art #ProductPrice Per UnitExc. VATAE2005WSE 1S 1G Argon Reg Side-Entry 74.08AE2008W 1S 1G CO2 Reg Side-Entry 74.69AE3005W 1S 2G Argon Reg Bot-Entry 77.52AE3005W10 1S 2G Argon Reg 10 Bar B/E 77.52AE3005WSE 1S 2G Argon Reg Side-Entry 77.59AE3008W 1S 2G CO2 Reg Side-Entry 77.52AE6005W 1S Plugged Argon Reg B/E 54.07AE7008W 2S 2G CO2 Regulator 141.22LX Series RegulatorsA range of economy regulators foruse with Argon or CO2 shielding gasin MIG and TIG applications. Modelsare available in single-stage one- andtwo- gauge designs. All feature 3/8”BSP RH outlets and 5/8” BSP RH inlet fittings.Product Price Per UnitArt #Exc. VATAE2005LX 1S 1G Argon Reg Bot-Entry 54.13AE2008LXSE 1S 1G CO2 Reg Side-Entry 59.98AE3005LX 1S 2G Argon Reg Bot-Entry 57.98AE3005LX10 1S 2G Argon Reg 10 Bar B/E 57.98AE3008LXSE 1S 2G CO2 Reg Side-Entry 57.98FlowmeterDesigned to be fitted to the outletof an argon or CO2 regulator to providegreater control of the flow of yourshielding gas through the gas line. Idealfor use in MIG and TIG. 2 modelsare available, with either 0-15LPMor 0-40LPM flow rate.Art #AU200 Flowmeter 0-15 LPM28.25AU300 Flowmeter 0-40 LPM30.91Shielding Gas EconomiserReduces unnecessary loss ofshielding gas by up to 50%.Shipped calibrated at 8Ltr/minbut can be adjusted via an allen keyfitting in the base. Includes a flowmeter.Product Price Per UnitArt #Exc. VATMW15210 Gas Economiser69.07MW15220 Gas Flow Tube 0 - 15LPM 7.53MW15230 Gas Flow Tube 0 - 40LPM 8.62Allows flow of up to 40cfh withoutrisk of freezing or noticeablechanges in flow/ pressure.Fits onto a CO2 cylinder andheats the CO2 gas prior to enteringthe regulator to prevent damage to theregulator in high flow applications.2m mains cable. 20LPM flow rate. IP44.Art #ProductProductPrice Per UnitExc. VATwww.RapidWelding.com240v CO2 heater (25W)Price Per UnitExc. VATAE1000 CO2 Heater 230V149.9515Order Before 4pm For NextDay Delivery (Mon-Fri)