mig welding - Rapid Welding and Industrial Supplies Ltd

MIG PROCESSAdditional Metal Surcharge(s) May ApplyHardfacing & StainlessHILCORD 600Metal cored wire for wear resistantsurfacing parts of steel, cast steel andhigh Mn steel, subject to abrasion,metal to metal wear, impact and/orcompression stresses.Din 8555: MSG 6-60SIFMIG HF600Solid hard facing MIG wire, for highwear resistance.Din 8555: MSG6-GZ-60SIFMIG 347Stainless steel wire, niobium stabilisedto prevent weld decay, giving excellentcorrosion resistance. Suitable for useon 18/8 type stainless steel, Nb and Tistabilised, such as 304, 321 andwhere the weld is subjected totemperatures above 400ºC.EN ISO 14343: 19 9 NbSi,BS: 2901 347 S96SIFMIG 316LSIA molybdenum bearing, stainless steelwith low carbon content. It is corrosionresistant for welding molybdenumbearing austenitic stainless steels.EN ISO 14343: 19 12 3 LSi,BS: 2901 316 S93,AWS A5.9 : ER316LSi (0.7kg)SIFMIG 308LSIStainless steel filler wire suitable forwelding 18/8 (304) austenitic stainlesssteels, providing good corrosion andwear resistance.EN ISO 14343: 19 9 LSi,BS: 2901 308 S93SIFMIG 309LSIThis stainless steel wire containshigher chromium and Nickel. It can beused for joining material of similarcomposition and also dissimilarstainless steels.EN ISO 14343: 23 12 LSi,BS: 2901 309 S93STLSSDia mm Art # 16kg Spl1.2H08600312 359.950.5C, 0.6Si, 1.5Mn, 5.5Cr, 0.6Mo n/a n/a 600Dia mm Art # 5.0kg Spl Art # 15kg Spl1.0WF601050 207.85 WF601015 479.551.2WF601250 150.65 WF601215 347.800.45 C, 3 Si, 0.4 Mn, 9 Cr 1450 n/a 570-650Dia mm Art # 12.5/15kg Spl0.81.01.2WO200815WO201015WO201215184.95165.40154.550.04 C, 0.8 Si, 1.5 Mn, 10 Ni, 20 Cr, 0.6 Nb 1440 650 180 133Dia mm Art # 0.7kg Spl Art # 3.75kg Spl Art # 12.5/15kg Spl0.60.81.01.2WO210607WO210807WO211007WO21120718.8015.6014.4014.30WO210640WO210840WO211040WO21124088.4068.7562.2558.55WO210612WO210815WO211015WO211215198.20139.55133.25132.000.02 C, 0.8 Si, 1.5 Mn, 12 Ni, 19 Cr, 2 Mo 1440 650 180 133Dia mm Art # 0.7kg Spl Art # 3.75kg Spl Art # 12.5/15kg Spl0.81.01.2WO330807WO331007WO33120715.1014.1014.00WO330840WO331040WO33124059.8558.4561.00WO330815WO331015WO331215122.85115.00113.400.02 C, 0.8 Si, 1.5 Mn, 10 Ni, 21 Cr 1440 650 180 133Dia mm Art # 3.75kg Spl Art # 15kg Spl0.81.01.2WO340840WO341040WO341240102.2092.5588.60WO340815WO341015WO341215221.15207.60205.10www.RapidWelding.com0.1 C, 0.4 Si, 1.5 Mn, 13 Ni, 26 Cr 1440 650 180 133SIFMIG 312This is a 29.9 stainless MIG wire,suitable for difficult-to-weld steels (Mnsteels, tool and spring steels), alsodissimilar materials. High resistance toweld metal cracking.EN ISO 14343: 29 9, BS: 2901 312S94Dia mm Art # 3.75kg Spl Art # 15kg Spl0.81.0WO350840WO35104093.4088.45WO350815WO351015293.45275.850.1 C, 0.4 Si, 1.7 Mn, 9 Ni, 30 Cr, 0.1 Mo 1440 750 200 133113Order Before 4pm For NextDay Delivery (Mon-Fri)