Operation Manual - Mrclab.com

Auto Hematology Analyzer User’s ManualFig.7-6 Panic limitsReference range of each parameter has been set before delivery of instrument, to modifyparameter reference range, you can select blood type and population category, and fill inparameter lower limit and upper limit blanks, click “Save” button.7.2.4 UnitsTo change parameter unit, click “Units” button, open Units setting menu as follows:Fig.7-7 Units settingTotally units of 10 parameters can be set, WBC, LYM#, MID#, GRA# use the same unit.Select appropriate unit, and click “OK” to save and exit, click “Cancel”, the Units will not bechanged.7.2.5 CommunicationCommunication setting is used to set up each parameter value for serial port transferinterface, to check or modify these settings, click “Communication” button, opencommunication setting menu as follows:39