1134 & 1135 Web User Guide rev2.0 - OneAccess extranet

More documents

Recommendations

Info

TELINDUS 1134/1135 Web Interface User’s GuideTo edit/modify an exist filter rule, select the desired rule created previously from "Add" in the"Edit" select box. The selected filter rule will appear on top section, as with the "Add" filter rule.Make the desired change to the MAC address, frame type and/or access type, and press "Apply".To delete filter rule(s), select the filter rule entry to delete in the "Delete" selection box. Note thatmultiple deletion is possible. Once all the desired filter rule(s) is/are selected for deletion, pressthe "Apply" button. The "Select All" select box can also be used to delete all the filter rule. Itprovides a quick method of selecting all filter rules for deletion.The "Enable Bridge Filters" button allow the user to enable or disable bridge filtering. It can beset/unset during any add/edit/delete operation. It can also be set/unset independently by justpressing the "Apply" button.Note: On a windows based machine, to find a MAC address, at a dos prompt type ipconfig /all.Note: There are three hidden filter rules within the bridge filter table. These rules are enteredautomatically by the system to ensure the user does not "lock" themselves out of the system. Thefirst rule allows any and all ARP frames through the system. The second rule allows all IPv4frames with the destination MAC address of the bridge to go through. The third rule allows allIPv4 frames with the source MAC address of the bridge to go through.Figure 26 (Bridge Filters)The Apply button will temporarily save these settings. To make the change permanent, you needto click on Save All Settings. At the System Commands page under the TOOLS, click on SaveAll.Version 1.0 Page 38/54 October 2004
TELINDUS 1134/1135 Web Interface User’s Guide4.6.12 Web FiltersThe Web Filter allows to filter certain types of Web Applications like Cookies, JAVA, AciveX orPop-Ups. See Figure 27 (Web Filters).Figure 27 (Web Filters)The Apply button will temporarily save these settings. To make the change permanent, you needto click on Save All Settings. At the System Commands page under the TOOLS, click on SaveAll.Version 1.0 Page 39/54 October 2004
Page 1 and 2: TELINDUS 1134/1135 Web Interface Us
Page 32: TELINDUS 1134/1135 Web Interface Us
Page 37: TELINDUS 1134/1135 Web Interface Us

1134 & 1135 Web User Guide rev2.0 - OneAccess extranet

Create successful ePaper yourself

Delete template?

Save as template?