1134 & 1135 Web User Guide rev2.0 - OneAccess extranet
1134 & 1135 Web User Guide rev2.0 - OneAccess extranet 1134 & 1135 Web User Guide rev2.0 - OneAccess extranet
TELINDUS 1134/1135 Web Interface User’s Guide4.6.6.2 Rule Setup PageFigure 20 (QoS Setup Screen)This page is invoked when you click on the "Add" button of "QoS Setup Page". See Figure 21(Rules Setup Page). This page allows you add a Rule or Matching criteria that identifies anApplication traffic. The Application traffic can be identified by Rule Name, Source/Destination IPAddress and Netmask, Source/Destination Port range, Protocol and Traffic Priority.The Traffic Priority field corresponds to the Priority Queue (High/Medium/Low) for for this traffic.The possible options for Protocol are - ANY, ICMP, TCP and UDP. Wildcard(*) entries areallowed for IP Address/Netmask and Port range fields.The additional TOS marking field allows you to assign a TOS value to this traffic. The values forthe TOS marking can be - No Change, Normal Service, Minimize monetary cost, Maximizereliability, Maximize throughput and Minimize delay.Version 1.0 Page 32/54 October 2004
- Page 1 and 2: TELINDUS 1134/1135 Web Interface Us
- Page 3 and 4: TELINDUS 1134/1135 Web Interface Us
- Page 5 and 6: TELINDUS 1134/1135 Web Interface Us
- Page 7 and 8: TELINDUS 1134/1135 Web Interface Us
- Page 9 and 10: TELINDUS 1134/1135 Web Interface Us
- Page 11 and 12: TELINDUS 1134/1135 Web Interface Us
- Page 13 and 14: TELINDUS 1134/1135 Web Interface Us
- Page 15 and 16: TELINDUS 1134/1135 Web Interface Us
- Page 17 and 18: TELINDUS 1134/1135 Web Interface Us
- Page 19 and 20: TELINDUS 1134/1135 Web Interface Us
- Page 21 and 22: TELINDUS 1134/1135 Web Interface Us
- Page 23 and 24: TELINDUS 1134/1135 Web Interface Us
- Page 25 and 26: TELINDUS 1134/1135 Web Interface Us
- Page 27 and 28: TELINDUS 1134/1135 Web Interface Us
- Page 29 and 30: TELINDUS 1134/1135 Web Interface Us
- Page 34 and 35: TELINDUS 1134/1135 Web Interface Us
- Page 36 and 37: TELINDUS 1134/1135 Web Interface Us
- Page 38 and 39: TELINDUS 1134/1135 Web Interface Us
- Page 40 and 41: TELINDUS 1134/1135 Web Interface Us
- Page 42 and 43: TELINDUS 1134/1135 Web Interface Us
- Page 44 and 45: TELINDUS 1134/1135 Web Interface Us
- Page 46 and 47: TELINDUS 1134/1135 Web Interface Us
- Page 48 and 49: TELINDUS 1134/1135 Web Interface Us
- Page 50 and 51: TELINDUS 1134/1135 Web Interface Us
- Page 52 and 53: TELINDUS 1134/1135 Web Interface Us
- Page 54: TELINDUS 1134/1135 Web Interface Us
TELINDUS <strong>1134</strong>/<strong>1135</strong> <strong>Web</strong> Interface <strong>User</strong>’s <strong>Guide</strong>4.6.6.2 Rule Setup PageFigure 20 (QoS Setup Screen)This page is invoked when you click on the "Add" button of "QoS Setup Page". See Figure 21(Rules Setup Page). This page allows you add a Rule or Matching criteria that identifies anApplication traffic. The Application traffic can be identified by Rule Name, Source/Destination IPAddress and Netmask, Source/Destination Port range, Protocol and Traffic Priority.The Traffic Priority field corresponds to the Priority Queue (High/Medium/Low) for for this traffic.The possible options for Protocol are - ANY, ICMP, TCP and UDP. Wildcard(*) entries areallowed for IP Address/Netmask and Port range fields.The additional TOS marking field allows you to assign a TOS value to this traffic. The values forthe TOS marking can be - No Change, Normal Service, Minimize monetary cost, Maximizereliability, Maximize throughput and Minimize delay.Version 1.0 Page 32/54 October 2004