DI-50E Data Sheet - K - Tech, Inc.

More documents

Recommendations

Info

SP1 SP2 SP3 SP4 SP5 SP6Planning to Harness Use the the Tiger Power 320 Series of Tiger of 320 Programmable Meter Meter Controllers continuedDECISIONDeviceNetDeviceNet was originally developed by Allen Bradley toconnect sensors from the factory floor to PLCs. It is adeterministic real-time system, typically used to connect to networksusing Allen Bradley PLCs. An optional carrier board isrequired for DeviceNet which replaces the standard serial outputwith a dedicated DeviceNet output connector.Data LoggingThe Tiger 320 Operating System has built-in, sophisticateddata logging software. Data logging can be triggered from thePROGRAM button, digital inputs, time or alarm functions. Upto 1MB of optional extra on-board memory provides a powerful,multichannel data capture and acquisition system.PLANNINGTIPTiger PMCs can be configured to log in an endless loop,overwriting the oldest data first and utilizing the maximumamount of memory available. Similar to the BlackBox on an aircraft, the data can be downloaded for analysisafter a problem event occurs.PLANNINGTIPDECISIONData logging can be combined with an Ethernet converterto provide an individual Web Page with data thatcan be accessed by a browser over the internet.Real-time ClockThe Tiger meter has an optional real-time clock with a 15year lithium battery backup, ensuring that time informationis not lost in the event of a power failure. It can be configuredin 12 or 24-hour modes for printing and data logging applications.PLANNINGTIPDECISIONOther applications of the real-time clock include activatinga setpoint or control action at fixed times of the hour,day, week, month or year.Flash Card Memory ModuleFor long term data logging, a FlashCard Memory Module that plugs into the carrier board output socket isavailable. Flash Cards are available from4 to 128 meg. They can be removed andread by a standard card reader, or thedata can be downloaded through the serial port or over theinternet with an Ethernet converter. The module also has anSSR setpoint output to trigger an external event.Configuration and Programming witha PCDECISIONWith a serial output module installed, Tiger 320 PMCs aremost easily configured using the Tiger 320 ConfigurationUtility, which can be downloaded free from the web andrun on any Windows-based PC. The utility also enables theuser to access some special capabilities of the Tiger 320 whichcannot be programmed manually by the front panel buttons.Code BlankingCheck only thecodes you wantto seeDisplay Text EditingEdit display text tosuit your applicationPLANNINGTIPDevelopment SoftwareDECISIONCustom Macro ProgrammingThis powerful, easy to use development system enablesprograms to be written in BASIC, utilizing any combinationof the hundreds of functions and thousands of registersembedded in the Tiger 320 Operating System. When yourBasic program is compiled into the Tiger 320 Macro-languageit is error checked and optimized. There are also numerous offthe-shelfapplication specific programs available. Many onlyneed the blanks to be filled in to use them and do not requireany knowledge of BASIC programming.PLANNINGTIPMacros are useful when implementing any specializedcontrol system that cannot be achieved by the standardconfiguration capability of the Tiger 320 OperatingSystem. Using the development software, functions can bealtered or added in a standard meter to perform the requiredjob. This may typically include logic sequencing functions andmathematical functions.PLANNINGTIPDeveloping a Macro is much easier and quicker thanprogramming a PLC, because the basic code requiredto customize the Tiger meter is considerably less thanthe ladder logic programming required for PLCs. This is due tothe hundreds of functions built into the Tiger meter that can bemanipulated or invoked by a macro, to fulfill the requirementsof almost any application.Scrollingannunciatormessagescan be programmedPLANNINGTIPThe Configuration Utility requires that an RS-232 interfaceboard be installed in a Tiger 320 for programming.However, if the final application does not require a serialoutput, the RS-232 board can be easily removed, after programmingis completed, and kept for future use.PLANNINGTIPWhen a Tiger 320 is to be used in a custom application,the utility enables all or any of the front panel programmingfunctions to be disabled (code blanking).Customized descriptive text can also be entered to appear withany setpoint action or event.PLANNINGTIPDifferent configurations can be stored in a PC for fastdownloading into a meter by the user. Custom configurationscan also be issued a serial number and preloadedat the factory.Macro in thewriting stageto appear with any setpoint activation, selected events or logicinputs. Easy to read, plain text prompts can be programmed toreplace the manual programming codes and provide a userfriendlyinterface for any custom application.F1PF2Page 8Texmate, Inc. Tel. (760) 598-9899 • www.texmate.com21 June, 2004 DI-50 320 Series (NZ300)
Block Diagram of the Tiger 320 Software and Hardware StructureP and UP Buttonsto enter setupmenu.PROGRAM LOCKIf Program lock is ON values aredisplayed, but cannot be changedSERIAL COMMUNICATIONRead and write into all registersCALP and DOWNButtons to entersetpoint menu.VIEW MODEto viewselectedfunction valuesRESETwith UP/DOWNPeak, Valley,Tare, TotalizersON DEMAND CALFUNCTIONSHold down thePROGRAMbutton for 4 secsto initiate Autotare, AutoCalibration,Manual Loader orInput ChannelCompensationProgPROGRAMBUTTONMACRO_PROCESSINGIncludingEDIT MACROF1_BUTTONMACRO_PROCESSINGF2_BUTTONMACRO_PROCESSINGF3_BUTTONMACRO_PROCESSINGF1 F2 F3FLASHRegisters 5120 to 614416 bit unsigned. May beaccessed by macros orSerial Port.SETPOINT LOCKIf Program lock is ON values aredisplayed, but cannot be changed6144 REGISTERSRegisters are comprised of 8, 16 or32 bit signed, unsigned or floatingpoint registers, implemented in eitherFlash RAM, RAM, FeRAM, EEPROMor NVRAM (Real time clock option).See the Register Supplement fordetailed information on ALL registersAll registers may be accessed, andread or written to via the serial port,and by user developed macros.The registers used for the operatingsystem should not be written into, asmodification of their data may renderthe meter inoperative.Registers 1 to 244Registers from 1 to 244 may be selectedmanually as a data source for setpointor output processing. However onlythose registers shown below containdata applicable for use as data source.Setpoints6 to 11- SP1,2,3,4,5,6 value65 to 70- SP1,2,3,4,5,6 Hysteresis,71 to 76- delay on make SP1,2,3,4,5,677 to 82- delay on break SP1,2,3,4,5,6Input Channels18,19,20,41,42- Raw Result,CH1,2,3,421 to 23,43,44- Scaled Result,CH1,2,3,445,46- Prescaler CH1,2Smart modules54 to 60- Smart Output 1,2,3,4,5,6,7Analog Outputs83, 84 - Analog Output 1 & 2Variables (Used with Macro Only)85 to 94 - Variable 1 to Variable 10Timers95 & 96 - Timer 1, 2Real time Clock213 to 219 - Real Time ClockAuto Zero Offset227 to 231 - Auto Zero Offset for Result,CH1, CH2, CH3 & CH4Operating SystemNOT USABLE as a data source.15,38,47,48,52,53,61-64,123-128,140,141,160,161,234-244Registers 257 to 512Linearization24 bit registers in EEPROM that storethe four 32 point LIN tables.Registers 513 to 1124Multi function, multi type Registersthat may only be accessed throughthe serial port or by macros. Theirfunctions are detailed in the RegisterSupplement.Registers 1125 to 2048OPERATING SYSTEM USE ONLYDO NOT write to these registers, asany alteration to their data may makethe meter inoperative.Registers 2049 to 4096Macro Code Storage16 bit unsigned. In Flash RAMRegisters 4097 to 5120OPERATING SYSTEM USE ONLYDO NOT write to these registers, asany alteration to their data may makethe meter inoperative.DISPLAY FORMATTINGI 2 CBUSDISPLAY DRIVECode1BRIGHTNESS, ANNUNCIATORS, TRENDCUSTOM TEXT FOR CH1, 2, 3, 4, RESULT, PEAK, VALLEY,TOTALIZER 1, TOTALIZER 2, SP1, SP2, SP3, SP4, SP5, SP6SCALE, OFFSET FOR CH1, 2, 3, 4 AND RESULTLOG BARGRAPH DISPLAY, dB DISPLAY, OCTAL.DECIMALS, , RIGHT HAND CHARACTER, AND ROUNDINGFOR CH1, 2, 3, 4, RESULT AND DEFAULT DISPLAYDEFAULTDISPLAYCHANNEL D R 1 2 3 4Select data source forOUTPUT PROCESSINGSelect data source for: Setpoint 1, 2, 3, 4, 5, 6;Analog output 1, 2; Data loggingSelect from R, 1, 2, 3, 4, Totalizer 1, 2, Peak,Valley, Tare or any usable registers from 1 to 244DEFAULTDISPLAYCHANNEL DRESULTCHANNEL RResult of CrossChannel Math RCross Channel Math1+2, 1-2, 1x2, 1/2, 1=R1 2RAW DATAPrescalerChannel 1 & 2LOGIC I/OFROMMODULESR11CHANNELS 1 22 3 4Select data source forCode1DISPLAY PROCESSINGSelect data source for:Display 1 (Default Display Channel D), Display 2,Display 3, Peak, Valley, Totalizer 1, Totalizer 2,Select from R, 1, 2, 3, 4, Totalizer 1, 2, Peak,Valley, Tare or any usable registers from 1 to 2442 3 4RESULT PROCESSINGof Cross Channel MathAVERAGING, CALIBRATION (SCALE & OFFSET),INVERSE of R, LOG OF R (Bargraph display only)LINEARIZING of R,SMART AUTO ZERO,SQUARE ROOT of R,3 4DIGITAL PROCESSINGAVERAGING,CALIBRATION (SCALE and OFFSET),INVERSE OF INPUT, LINEARIZATION,LOG OF INPUT (Bargraph display only)RTD, SAMPLE RATE, SMART AUTO ZERO,SQUARE ROOT, THERMOCOUPLESCHANNELS 1 2 3 417 BIT ON BOARDDUAL SLOPE A to DREF INSPC_1 to 6Code7CALCode2Code4Code5Code6CALANALOG, DIGITALAND LOGIC I/OASCII, MODBUS, DEVICENETMeter TO Meter Communication,ETHERNET (TCP/IP), Epson CompatibleSerial Printer DriverDATA LOGGING Code8Manual or auto, Up to 4000samples, Date and Timestamp, endless loop record,Burst downloadingSETPOINTS SPC_1 to 6Up to 6 relay, SSR,TTL or open collector.PID, deviation, trigger, pulse,tracking, hysteresis, latching,timer modes, reset,High/low/deviation activationPLUG IN OPTO-ISOLATEDI/O 6 IN 6 OUT OR 6 IN 16 OUTANALOG OUTPUTVoltage or current,single or dualMACRO PROCESSINGA macro can access all functions and readand write into all registers. Macro Timer1,Macro Timer2 have 0.1 second resolution.Macros allow a user to customize the meterfor a specific application using the Tiger 320Development system.Macros may be locked to prevent access byanyone.LinearizingCAL4 Tables of 32 Points eachor 1 Table of 125 PointsTOTALIZER 1CALTOTALIZER 2Two independent totalizersOptional Real-time clockwith date and time stampCALCALInternal System ClockDownloads from Real Time Clockor starts from 12:00 on power up.Can be displayed on CH3, CH4RESIDENT TIMER 1 Code5RESIDENT TIMER 2 Code6Runs ONLY if selected on CH3,or CH4. Resolution 1 secRear PinsCode9Hold, Test, Lock & Capture.The Lock, Hold and Capturepins can be reprogrammedfor use as Digital Logic I/O pins.SP1SP2SP3SP4SP5SP6I 2 CI 2 CMICROSigma DeltaA to D16 to 24 BitREFREFSigConMICROREFSigConPULSEMUXREFSignalConditioningREFREFSignalConditioningSSRSSRSignalConditioningSSR SSRSignalConditioningZEROSPANSMART MODULES WITH MULTICHANNEL INPUTS,AN ON-BOARD A TO D CONVERTER,MICROPROCESSOR, AND TWOSOLID STATE RELAY OUTPUTSSMART MODULES WITH AN ON BOARDMICROPROCESSOR AND TWO SOLID STATERELAY OUTPUTS WITH PULSE, OR QUADRATUREENCODER INPUTS FOR COUNTING, FREQUENCY OR POSITIONMULTI-INPUT MODULESW/DIGITAL SCALINGSINGLE INPUT MODULESWITH ANALOG SCALING12-30-02 4:00 PM21 June, 2004 DI-50 320 Series (NZ300) Texmate, Inc. Tel. (760) 598-9899 • www.texmate.comPage 9
Page 3 and 4: Tiger 320 Series Modular Literature
Page 6 and 7: Planning to Harness the Power of Ti
Page 10 and 11: Configuration Utility ProgramThe Ea
Page 12 and 13: Index32-Bit Operating System ......
Page 14 and 15: Controls and IndicatorsFront Panel
Page 16 and 17: SP1 SP2 SP3 SP4 SP5 SP6Front Panel
Page 18 and 19: Front Panel Programming Codes conti
Page 20 and 21: Initial Setup Procedures continuedI
Page 22 and 23: [CAL] - Calibration Modes for Input
Page 24 and 25: [CAL] - Calibration Modes for Input
Page 26 and 27: Initial Setup Procedures[CodE_1] -
Page 38 and 39: SP1 SP2 SP3 SP4 SP5 SP6SP1 SP2 SP3
Page 40 and 41: Setpoint Programming Mode continued
Page 42 and 43: Setpoint Programming Mode continued
Page 44 and 45: Registers That Can Be Selected By F
Page 46 and 47: Carrier Board Output PinsAnalog Out
Page 48 and 49: 2V20V200VCUSTOMVOFFONON1 2Component
Page 50 and 51: +++0_+0_I-Series Input Signal Condi
Page 52 and 53: ++ONONONI-Series Input Signal Condi
Page 54 and 55: +V++++++++I-Series Input Signal Con
Page 56 and 57: Texmate, Inc. Tel. (760) 598-9899
Page 58 and 59:
Ordering Information continued80-MO
Page 60:
Case DimensionsPANEL CUTOUTCase wil
show all

DI-50E Data Sheet - K - Tech, Inc.

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?