DI-50E Data Sheet - K - Tech, Inc.

Case DimensionsPANEL CUTOUTCase will mount in standard 1/8 DIN cutouts4mm(0.16")8 places3mm(0.12")8 places1/8 DINCutout spacersMosaic Fitting40.8mm(1.61")Metal Surround CaseP/N:(OP-MTL96X48) usesMetal Screw Mount Clipsand has a max. panelthickness mountingof 15.5 mm (0.61").NOTE: The Metal Surround Caseis pre-installed at the factory andcannot be removed withoutdamage to the case.50mm(1.97")91.6mm(3.6")87.4mm(3.45")43.4mm(1.71")Snug Fitting92 mm Loose Fitting(3.62")These dimensions areincreased by 1.6mm (0.06")when the metal surroundcase is installed.TOP VIEWMax. panel thickness45 mm(1.77")5.3 mm(0.21")3.7mm(0.15")43.4 mm(1.71")DIN Cutout spacersSIDE VIEW117 mm(4.61")Straight-thru Connectorfor meters with outputboard 20mm (0.79")40.8 mm(1.61")Right-angled Connector11.8mm (0.47")For extra strength in portable applications, the 8 DINspacers should be snipped off and the Mosaic fittingcutout used. Alternatively, the High Strength PanelMounting Kit (Part # OP-PMA96X48) can be used.Prog.Prog.SP1 SP2 SP3 SP4 SP5 SP6SP1 SP2 SP3 SP4 SP5 SP6The 96x48mm case isparticularly suitable formounting in mosaic panelsor insulative panels up to 2"thick. They can also stackmount, 2 up in existingcutouts for 1/4 DIN(96x96mm) or 4 up in1/2 DIN (96X192mm).SP1 SP2 SP4Prog. SP3 SP5 SP696 mm(3.78")91.6mm(3.6")DINCutoutSpacerTo open rear cover,use a small flatbladescrew driver.Press down lightly torelease catch on topor bottom of caseand leaver outwards.95.4mm(3.77")87.4mm(3.45")mosaicfittingWhen extra panel mounting tightnessis required, order the optionalscrew mount clip. P/N:(OP-MTLCLIP)BaseO-ringGasketClear LockableNEMA 4XSplash Proof CoverP/N:(OP-N4/96x48)Various bezel colorsare available.Black is standard.4.7mm(0.19")DIN Cutout SpacerFor additional strength, extra MountingSlide Clips can be ordered and doubled upone behind the other. P/N: (75-DMTCLIPF)96x48 Panel to Case Seal Adaptor KitP/N: OP-PMA96X48O Ring (039, x1/6") Seal BackplateSeal Frame Foam Seal GasketBezelPanelMeter CasePanel Seal Section ViewBezelSeal Frame (Plastic)2mm Removable(0.08") Key-lockConnectorSocketPanelFoam Seal GasketSeal Backplate (Plastic)O-Ring (039, x1/16")CoverPanel adaptorplates areavailable toretrofit mostexisting panelcutouts.SafetyCatch48 mm(1.89")3.9 mm(0.15")typicalProg.FRONT VIEW1/8 DIN 96x48mmSP1 SP2 SP4SP3 SP5 SP696 mm(3.78")WARRANTYTexmate warrants that its products are free from defects in material and workmanship undernormal use and service for a period of one year from date of shipment. Texmate’s obligationsunder this warranty are limited to replacement or repair, at its option, at its factory, of any of theproducts which shall, within the applicable period after shipment, be returned to Texmate’s facility,transportation charges pre-paid, and which are, after examination, disclosed to the satisfactionof Texmate to be thus defective. The warranty shall not apply to any equipment whichshall have been repaired or altered, except by Texmate, or which shall have been subjected tomisuse, negligence, or accident. In no case shall Texmate’s liability exceed the original purchaseprice. The aforementioned provisions do not extend the original warranty period of anyproduct which has been either repaired or replaced by Texmate.USER’S RESPONSIBILITYWe are pleased to offer suggestions on the use of our various products either by way of printedmatter or through direct contact with our sales/application engineering staff. However, sincewe have no control over the use of our products once they are shipped, NO WARRANTYWHETHER OF MERCHANTABILITY, FITNESS FOR PURPOSE, OR OTHERWISE is madebeyond the repair, replacement, or refund of purchase price at the sole discretion of Texmate.Users shall determine the suitability of the product for the intended application before using,and the users assume all risk and liability whatsoever in connection therewith, regardless of anyof our suggestions or statements as to application or construction. In no event shall Texmate’sliability, in law or otherwise, be in excess of the purchase price of the product.Texmate cannot assume responsibility for any circuitry described. No circuit patent or softwarelicenses are implied. Texmate reserves the right to change circuitry, operating software, specifications,and prices without notice at any time.For product details visit www.texmate.comLocal Distributor Address995 Park Center Drive • Vista, CA 92081-8397Tel: 1-760-598-9899 • USA 1-800-839-6283 • That’s 1-800-TEXMATEFax: 1-760-598-9828 • Email: sales@texmate.com • Web: www.texmate.comTexmate has facilities in Japan, New Zealand, Taiwan, and Thailand. We also haveauthorized distributors throughout the USA and in 28 other countries.Copyright © 2004 Texmate Inc. All Rights Reserved.Page 60Texmate, Inc. Tel. (760) 598-9899 • www.texmate.com21 June, 2004 DI-50 320 Series (NZ300)