info CATALOGUE - tehnoplus medical

16Active MattressesProderm 4Proderm 3 PlusProderm 3Proderm 2 PlusProderm 2Proderm 1 PlusProderm 118Bedside CabinetsManoClassicWooden CabinetsServers19CouchesExamination CouchesTransport CouchesExamination and Treatment Couches20Instrumentand Universal TrolleysAurionUni TrolleysInstrument TrolleysUniversal Trolleys22Medical MobiliaryTrolleysDrug Distribution SystemsInfusion StandsBoxes, Screens, MatsStepsDispensers, Containers24Medical FurnitureMedlinHinz Ward TrolleysFiling CabinetsWardrobesMetal Shelves26FurnitureOffi ce FurnitureSoftlin Furniture28Seating FurnitureSoftlin KomfortChairsBenchesArmchairs

universal bedsuniversal bedsThe Novos, Terra and Calma universal beds fulfi l the requirements ofshort and long patient hospitalisation on standard wards in medical establishments.CALMAMechanical bed: positioning of the back and thigh section by a reinforced gas springThe patient surface comes in 2 or 4 sections (86×200 cm in dimension), it is made fromsteel netsThe patient surface can be extended on both sides of the bed by 10 cm (total 20 cm)The painted rests non-removable, with a removable panelThe bed is equipped with four 125 mm Tente wheels (two diagonal brake wheels, one directdirection locking wheel)Protective wheels in the corners of the bedSafe working load 170 kgTERRAMechanical bed: positioning of the back and thigh section by a reinforced gas springThe patient surface comes in 2 or 4 sections (86×200 cm in dimension), it is made fromsteel netsThe Terra bed allows tilting to TR/ATR position (15°/9°) mechanicallyThe patient surface can be extended on both sides of the bed by 10 cm (total 20 cm)The painted rests non-removable, with a removable panelThe bed is equipped with four 125 mm Tente wheels (two diagonal brake wheels, one directdirection locking wheel)Protective wheels in the corners of the bedSafe working load 170 kgNOVOSPositioning of the lift and individual sections of the patient surface by electric motorsThe patient surface comes in 4 sections (86×200 cm), it is made from steel netsBed height adjustment 45–82 cmThe patient surface can be extended on both sides of the bed by 10 cm (total 20 cm)The painted rests is removable, with a removable panel. The Novos bed can also be suppliedwith wooden panels.Simple control by three electric motors with the aid of a hand controlThe bed is equipped with four 125 mm Tente wheels (central control if required)Protective wheels in the corners of the bedSafe working load 170 kg8universal beds

nursing bedsCONTEMPORAElectric motors to adjust the height, the position of the back and thigh rest of the patientsurface and the TR/ATR tiltThe patient surface has 4 sections consisting of removable plastic parts, wire sections ora special fl exible system for a comfortable lying positionBed height adjustment 36–76 cm: a total 40 cm lift lasts only 18 secondsBack and thigh rest auto-regression (by 11 and 6 cm) helps reduce the risk of bedsoresManual memory control for frequently used positionsMaximum safety for the patient: the bed has either two or four separately lowering adjustableside railsThe bed is equipped with foot controls and simple foot brakesThe wooden panels come in several designs and various colour shadesSafe working load 200 kgnursing bedsESTETICAVITALIATERNO PLUSElectric motors to adjust the height, the position of the back and thigh rest of the patientsurface and the TR/ATR tiltThe patient surface has 4 sections (90×200 cm) consisting of plastic removable sectionsColumn construction, bed height adjustment 44–84 cmBack and thigh rest auto-regression helps reduce the risk of bedsoresThe “Sit-up Position” can be electrically adjustedMechanical release of the backrestMaximum safety for the patient: the bed has either four divided collapsible side rails or integratedlongitudinal lowering side railsThe wooden panels come in several designs and various colour shadesThe bed is equipped with four 100 mm centrally controlled Tente Integral wheelsSafe working load 170 kgElectric motors to adjust the height, the position of the back and thigh rest of the patientsurface and the TR/ATR tiltThe patient surface has 4 sections (86×200 cm) consisting of a removable wire netBed height adjustment 40–80 cmThe bed can be moved even in the lowest patient surface positionBackrest auto-regression helps to reduce the risk of bedsoresThe “Sit-up Position” can be electrically adjustedMechanical unblocking of the backrestFor patient safety: integrated longitudinal lowering side rails, safety control with an automaticlock, automatic brakeThe wooden panels come in several designs and various colour shadesSafe working load 180 kgElectric motors to adjust the height, the position of the back and thigh rest of the patientsurface and the TR/ATR tiltThe patient surface has 4 sections (90×200 cm) consisting of a wire netBed height adjustment 39–81 cmThe thigh rest can be mechanically adjusted with the aid of a screen to a range of 0–20°and ergonomic and comfortable patient surface adjustmentIntegrated longitudinal lowering side railsin wood or aluminium with a safety lockMechanical unblocking of the backrestThe wooden panels come in several designs and various colour shadesBlocking of the control is possibleThe bed is equipped with four 100 mm wheels with brakesSafe working load 170 kgnursing beds9

transport stretcherstransport stretchersSPRINTThe transport stretcher Sprint meets the demanding requirements of patientadmission and transport of critical patients.Unique collapsible side railsdo not reach above the edgeof the stretcher in any positionIdealfor urgentadmissionQuickand simple controlUnique mattressEasy transportX-ray scanning possibleSafety elements and robustdesign minimising risk duringtransportEXAMINATION AND TRANSPORTThe handrail at the head end of the stretcherallows easy manipulation and can be foldedand slid under the bed. The handrail canalso be placed at the foot end of the bed.Easy access to the controls and gas springfacilitates the backrest positioningA collapsible telescopic infusion stand canbe placed in each corner of the stretcherThe Sprint can be supplied modifi ed forX-ray scanning and the use of a C-arm. TheX-ray cassette holder can be moved alongunder the entire patient surface.EASY PATIENT TRANSFERThe unique mattress for the Sprint containsrigid sliding mats, which create a fi rm surfacefor the transfer of the patient from bedto bed or operating table. The mattress coveris made of antistatic material with a waterproofsurface.The Sprint Stretcher offers maximum comfortfor urgent admissions: the 5th wheel facilitatesmanipulation, the centrally controlledwheels of 200 mm in diameter increaseclearance, the protective strips and cornerwheels minimise the effect of collisionsfacilitating patient transportTECHNICAL PARAMETERSOuter dimensions75.5×205 cmPatient surface(mattress)65×192 cmPatient surfaceheight adjustment56.5–89.5cmSide rail heightabove patient surface 40 cmSide rail length140 cmBackrest tilt 0°–70°TR/ATR tilt 12°/12°Safe working load230 kg10transport stretchers

delivery and children’s bedsAVE High functionalityWide range of accessoriesallows a classic or alternativebirth methodThe original asymmetric position of the liftingcolumn allows for the quickest manipulation ofthe leg section, which remains connected to thedelivery bed and paddingSimple controlWide range of accessoriesPleasant designEasy maintenancedelivery bedsBack and sitting section are controlled by electric motors, leg control also availableFoot section can also be adjusted to several secured positionsLow step height for comfortable mountingCombining leg rest and hand holder into one section ensures easy access for the expectantmotherEasy wheel brakeBroad accessory selection: adjustable headrest, horizontal bar, lordosis support, massagingsegment, under light, infusion standOptimal rigidity of mattress for birth and restRounded corners and compact surfaces guarantee perfect safety allowing quick and easycleaning of the bed. Padding can be simply removed by cleaning.Attractive design in four colour shadesTECHNICAL PARAMETERSLength when extended 210 cmWidth without joints 101.6 cmMin. step height incl. padding 60 cmMax. patient weight150 kgMax. lift29.5 cmBackrest tilt−12°/+70°Seat section tilt 0°/+20°Leg rest tilt 0°/+25°Leg rest height tilt22.5 cmThe Rooming-In baby bed with height adjustment and bed surface tilt is suitable for thehospital neonatal wardsHeight adjustment and tilting to the Trendelenburg and ATR position (±14°)The bed consists of a transparent plastic removable tubRooming-In is mobile: 4×65 mm diameter double wheels, 2 have separate brakesDimensions: 58 cm width, 96 cm length, height with handrail 101–131 cmA washable mattress is supplied as an optional accessorychildren’s bedsTOMChildren’s bed in variants of Tom 140 and Tom 115 with mechanical height adjustmentof the bed surface and TR/ATR tilting position for standard children’s wardsTom 140 allows positioning by a mechanical screw mechanism, dimensions of bed surface70×136 cm (height without mattress 78–109 cm), outer dimensions 83×165 cmTom 115 without back section positioning, bed surface dimensions 55×115 cm (heightwithout mattress 78–109 cm), outer dimensions 69×144 cmThe bed has an integrated lowering side rail adjustable to 3 positions. Adjustability issecured against accidental dropping or child manipulation.The Tom bed is mobile: 4 double 100 mm diameter wheels with separate brakes, andprotective wheels in the bed corners and at head end2 infusion stand holders, diagonally placed in the bed cornersA washable mattress is supplied as an optional accessorydelivery and children’s beds11

ed accessoriesbed accessoriesAll Linet beds can be supplied with a broad range of accessories adaptedto the specifi c type of bed. Customer-orientated practical aids respond tothe current needs of health workers. Suitable accessories increase theutility qualities of the beds and fully respect the requirements and needsof the specifi c department; help to increase the self-suffi ciency of the patientsand facilitate the work of health workers.The entire range can be found at www.linet.cz.Accessories for Linet beds are:horizontal bars and infusion standswriting or monitor racksvarious types of side railsside rail paddingvarious bottle or infusion holders,hooksfastening systemsstands, bars, baskets, name tags,lampsLIFTING POLEWITH PLASTIC HANDLEWRITING OR MONITOR RACKSSIDE RAILS1/12 2/12 3/12INFUSION ST4/12 5/12 6/12SIDE RAIL PADS7/12 8/12 9/1212bed accessories

KINETEC EXTENSIONSextensionsModern Kinetec extensions are designed for orthopaedic, surgical, traumatology andARD departments or other specialised departmentsThey present a modern trend in orthopaedic extensions, the so-called Octagonal systemLight and resistant dural constructionsKinetec extensions are specially designed for Eleganza and Eleganz beds with a solidhead endThe Kinetec traction frame offers a wide range of accessories and can be used for suspendinginfusionsextensions1/13A EXTENSIONSThe A type orthopaedic traction frame can be used as a supporting construction for extensiontreatment procedures or the fi xing of limbs, spines and pelvisesThe A Extensions are designed for Praktika, Eleganza and Multicare beds (not possibleto use on a bed with a solid head end)Made from stainless steelThe system allows various dimension adjustment and variability of pulleys and other accessories2/13B EXTENSIONSThe B type Extension system is designed forthe Tom 115 and Tom 140 children’s bedsC EXTENSIONSUniversal traction frame suitable for normalmetal hospital beds3/13 4/13D EXTENSIONSSimple aid for the traction of lower limbs orcervical spine5/13WEIGHTSSize of the traction adjusted by selection ofappropriate weight. Design: metal weightsor weight imitation leather sand bags ofvarious bulk (sizes).6/13extensions13

passive mattressespassive mattressesLinet passive anti-decubitus mattresses are suitable as an effective aidfor prevention and treatment of pressure sores up to second grade. Theyprovide perfect distribution of the patient’s weight and prevent unnecessarytissue pressure.Prevention of pressure soresBreathable coverMaximum hygieneEasy maintenancePatient safetyIIpressure sore risk levelrecommended for clinical caretwo-sided designPREVENTION OF DECUBITUSLinet passive mattresses are developed on the basis of pressure distributionmeasuring with the aid of an X-Sensor device. Pressure maps show theability of the mattress to distribute the pressure caused by a patient’sweight. The optimal anti-decubitus mattress achieves a pressure valuein the risk body spots under 32 mmHg (the value which resultsin the closure of tiny vessels in tissue), while in ordinarymattresses used in hospitals the pressure on certain partsof the body reaches as much as 150 mmHg. The basicprecondition of anti-decubitus effects is theuse of high quality, soft foam as well as the profiled core of the mattress and use of fl exible covers.CLINICAREIIIDUOTERAPreventive combined mattress with a signifi cant anti-decubitus effect. Designed for patientswith a medium risk of pressure sores development and for patients with developedsecond-grade pressure sores. Clinicare signifi cantly extends the intervals of positioningof risk patients.Clinicare is made of cold polyurethane foam with a Lintex coverMattress form three zones: head, body and heels. The section beneath the head and heelsconsists of three foams of different density and profi ling. Foam with great distributionproperties fi lls the centre of the mattress. The entire core of the mattress is covered witha layer of thermo-elastic foam, which also helps to distribute pressure well.The border of Clinicare is stiffened with high resilient PUR foam. This ensures stability ofthe patient, comfort when sitting on the edge and better manipulation with the mattress.Risk III, Norton 20-13, mattress height 12 cm, weight 8.6 kgPreventive two-sided anti-decubitus mattress suitable for preventing medium risk patientsand patients with damaged tissues at the level of fi rst grade of pressure soresDuotera is made of cold polyurethane foam with a Lintex coverThe core of the mattress is two directional profi led. Thanks to the special profi le in threezones the mattress perfectly copying the body and distributing pressure equally.The greater thickness of the mattress brings comfort in the lying position and the sidesare stiffened with high resilient foamRisk II, Norton 20-17, mattress height 14 cm, weight 9.4 kgIITwo directional profi ling protect the patient against overheating and moisture. The contoursymmetry allows the two-sided use of the mattress.14passive mattresses

passive mattressesPREMAPreventive layered anti-decubitus mattresses suitable for low risk decubitus patientsPrema is made of cold polyurethane foam with a Lintex coverThe mattress core is divided into three zones according to the profi ling shape. A specialshape of cubes of great softness is created in the section beneath the head and heels.The profi led central section is adapted for equal weight distribution.The edges of the mattress are stiffened with high resilient foam to stabilise the patientand ensure comfort when sitting on the edge of the bedRisk II, Norton 25-21, mattress height 12 cm, weight 8.2 kgIITwo directional profi led core increases the preventive properties of the mattressand the comfort of the patientpassive mattressesCOMFORTStandard mattress ensures great comfort for long-term bedridden patientsThe Comfort mattress is made of cold polyurethane foam with a Lintex coverThe core of the mattress consists of highly fl exible and resilient foam that is suffi cientlysoft and brings equal distribution to the patient’s weight. The special material of themattress core prevents pressure sores and brings great lying comfort.Risk I, Norton 25-21, mattress height 12 cm, weight 8.1 kgIELASTICStandard two-sided mattress ensures great comfort for patients lying on a bed. It is madeof cold polyurethane foam with a combined Lintex/cotton stitched cover. The mattressacts as prevention against the collection of moisture and overheating, eliminates shearand friction forces. The combined cover allows the thermal and hygienic properties of themattress to adapt to the individual needs of the patient.Mattress height 12 cm, weight 8 kg0QUALITY COVERThe cover made of Lintex fabric with a two directional stretchability allowsbetter distribution of a patient’s weight and restricts the influenceof shear and friction forcesThe breathable materials allows the permeation of air while actively reducingthe moisture of the skin, an important factor for the cause ofpressure soresWater-proof quality also guarantees liquid tightnessThe Lintex fabric is made while using of additions preventing thegrowth of bacteriaThe Lintex cover is used for all types of Linet passive mattresses designedfor the health serviceThe service life and functionality is supported by the possibility of turningthe core of the mattress. The same spots are not strained thereforepreventing subsequent collapse of the mattress core. The recommendedinterval for replacing the mattress is 7 to 10 years.HYGIENE AND SAFETYThe cover is made of high-frequency welding technology, so themattress surface is easily and effectively cleanable. The risk spots ofthe seams are removed for these could become a source of infection.The covered zip protects the inside of the mattress against the penetrationof impurities. The zip itself is also protected against impurities.All the mattresses are designed with an accent on maximum patient safety.The materials used have reduced flammability. The flammabilityparameters are tested in accordance with international standards.passive mattresses15

active anti-decubitus systemsactive anti-decubitus systemsPRODERM 4IV24cmpressure sore risk levelrecommended for clinical caremattress heightquick air release from the mattressin case of resuscitationtype of interval (dynamic mode)possible replacement of individual cells5–95 min1–6cooling and drying of the patientby ventilated cells »Micro air loss« systempossibility of patient transportalarm in case of a power cutlength of time intervalpatient comfort adjustment level»Low air Loss« system of patientair cooling and dryingThe Proderm 4 mattress with a 3-1 interval infl ating system is the most effective dynamicsystem for preventing and treating pressure sores. It is also suitable for patients witha very high risk of development of pressure sores.Low Air Loss – is a system providing tempered air current at a fl ow of 1.8 litres per secondand ensures air cooling and drying of the patient’s skinSpecially shaped double cells (shape “8“)Type of interval: 3-1 (dynamic mode)Length of interval: 5-95 minutes (adjustable after 5 minutes)Mattress height: 24 cmMax. patient weight: 280 kgIV24cm3:15–95 min 1–8Replacement mattress is equipped with 3-1 interval infl ating system, adjustment of thepressure level depending on the patient’s weight and digitally controlled infl ating interval.Proderm 3 Plus is also suitable for patients with a high risk of development of pressuresores.The possibility of selecting a dynamic or static modeSpecially shaped double cells (shape “8“)Type of interval: 3-1 (dynamic mode)Length of interval: 5-30 minutes (adjustable after 5 minutes)Mattress height: 24 cmMax. patient weight: 190 kgIV24cm3:15–30 min 1–6PRODERM 3Replacement mattress is equipped with a 3-1 interval infl ating system and manual pressurecontrol level depending on the patient’s weight. Proderm 3 is designed for patientswith a high risk of development of pressure sores and treated for third grade pressuresores.Possibility of selecting a dynamic or static modeSpecially shaped double cells (shape “8“)Type of interval: 3-1 (dynamic mode)Length of interval: 20 minutesMattress height: 24 cmMax. patient weight: 190 kgIII24cm3:120 min16active anti-decubitus systems

active anti-decubitus systemsPRODERM 2 PLUSReplacement mattress with a 2-1 interval infl ating system and manual pressure controllevel, designed for patients with a high risk of development of pressure sores and for treatingsecond-third grade pressure soresPossibility of selecting a dynamic or static modeSpecially shaped double cells (shape “8“)Type of interval: 2-1 (dynamic mode)Length of interval: 10 minutesMattress height: 24 cmMax. patient weight: 190 kgII-III24cm 2:1PRODERM 2Active overlay used in combination with a standard foam mattress is designed for patientswith a medium risk of development of pressure sores and treatment of fi rst-second gradepressure soresPossibility of selecting a dynamic or static modeType of interval: 2-1 (dynamic mode)Length of interval: 10 minutesMattress height: 13.5 cmMax. patient weight: 190 kg10 minactive anti-decubitus systemsII13,5cm 2:110 minPRODERM 1 PLUSPreventive anti-decubitus overlay with a 2-1 interval infl ating system used in combinationwith a standard foam mattress. Proderm 1 Plus is designed for patients with a mediumrisk of development of pressure sores and for treating fi rst-second grade pressure sores.Type of interval: 2-1 (dynamic mode)Length of interval: 10 minutesMattress height: 13.5 cmMax. patient weight: 190 kgI-II13,5cm 2:110 minPRODERM 1Bubble anti-decubitus overlay used in combination with a standard foam mattress. Proderm1 is suitable for patients with a low risk of development of pressure sores and fortreating fi rst grade pressure sores.Compact mattress consisting of a series of cells in which air is replaced alternately in regularfi ve-minute intervalLength of interval: 5 minutesMattress height: 6.5 cmMax. patient weight: 90 kgI6,5cm2:15 minactive anti-decubitus systems17

edside cabinetsbedside cabinetsELEGANZA MANO1/18The unique construction of the Eleganza MANO patient cabinet, patented by Linet, allowsthe patient to use all functions independently without nurse assistance.Manual wheel control above: by turning the handrail you can lock or unlock the brakeThe mechanism of the dining board can be easily manipulated. The patient can adjustthe height and position with one hand.The cupboards are accessible from the front and back of the cabinet and the drawerscan slide out in both directionsThe top and dining board (made of HPL material) with raised edges to stop falling objectsUpper drawer, niche, bottom cupboard with a shelf, towel holder, bottom tray holdersDesign adapted to Eleganza beds, selection of fi ve colour shadesPainted metal cabinet body, ABS plastic drawer ends, 4 double 75 mm diameter wheelsHeight 93 cm, width 51 cm, depth 48.5 cm, dining board 59×34 cmELEGANZA CLASSIC2/18The Eleganza Classic patient cabinet with or without collapsible dining board allows placementon the left or right of the bed while maintaining all the functions.The cupboards are accessible from the front and back of the cabinet and drawers canslide out in both directionsThe mechanism of the dining board is integrated into the body, board height 73–108 cmTop and dining board (made of HPL material) with raised edges preventing objects fromfalling, the top board also contains handrails for manipulationUpper drawer, niche, bottom cupboard with a shelf, towel holder, bottom tray holders, integratedplastic bottle and magazine holder (only model without dining board)Painted galvanized metal cabinet body, HPL drawer ends4 double 75 mm wheels, 2 with brakeHeight 86.5 cm, width 51.5 cm, depth 50 cm, dining board 59×34 cmPATIENT CABINETWITH MEAL DESKDouble-sided melamine chipboard accesscabinet. Dining board, drawer, bottomcupboard and bottle holder. Two separatewheels (75 mm) with brakes.PATIENT BEDSIDE CABINETOne-sided melamine chipboard bedsidecabinet. Drawer, niche, bottom cupboardand bottle holder. Cabinets suitable forwooden panelled beds.3/18 4/18STYLO S3Double-sided dining, writing and readingboard, height adjustable (85–122cm),double-sided cover boardDINING CABINETDouble-sided dining cabinet with solid sideshelf and dining board,height adjustable (82–110cm),double-sided cover board.Raised edges of dining board preventsobjects from falling.5/18 6/1818bedside cabinets

couchesEXAMINATION COUCHESWITH A FIXED HEIGHTA strong metal construction, dual layered padding, upholstered with medical leatherA mechanical adjustable headrest, the possibility of hand gripsIt is easily cleaned and washed and includes a holder for hygienic paperThe possibility of replacing the wheelscouches1/19EXAMINATION COUCHESWITH ADJUSTABLE HEIGHTElectric or hydraulic liftsPainted metal constructionMultilayered bedding area, upholsteredmedical leatherMechanical adjustable headrestA holder for hygienic paperPossible accessories: wheels for movingthe bed when empty, foot controlof the electric motor2/193/19TRANSPORTATION COUCHESPainted metal construction, double layered bedding area upholstered with medical leatherWith a fi xed height or with a hydraulic liftMechanical adjustable headrestWheels with brakesProtective wheels at the corners of the bedHandles in the body of the bedPossible accessories: metal side rails, stand for infusion, protective straps4/19SPECIAL EXAMINATIONAND EMERGENCY COUCHES5/196/19A wide assortment (specifically arrangedaccording to needs): gynaecological,urological, rehabilitative, shower etc.Painted metal construction, multilayeredbedding area upholstered with medicalleatherOptions according to type: control andadjustment with an electric motor ordone manually, moveable or stationaryExtensive accessories: support forlegs, hands waste bowl, holder for hygienicpaper, stand for infusion etc.couches19

instrument and universal trolleysinstrument and universal trolleysAURIONSet-up according toindividual needsMaximum storageand working spaceThe universal multi-purpose Aurion trolley is designed for drug distributionand other supply processes inside medical establishments. Its meritis its high variability – Aurion offers more than 40 individual solutions forall modern hospital care needs.Top trolley board has with a raised edge,which prevents objects falling and drippingspilled solutionsThere are 50 accessories – ranging frominfusion stands, shelves, bins, drawers andholdersSimple manipulationModern designSafe transportINDIVIDUAL ADJUSTMENTAurion comes in model ranges Mega (width95 cm, depth 58 cm, height 96 cm) andCom pact (width 83 cm, depth 70 cm, height94 cm)Selection from almost fi fty accessories: adjustableinfusion stand, used needle vessels,oxygen cylinder holder, dispensers, shelves,and basketsDesign and construction allows very easymanipulationTakes up less room, but offers more storageand working spacePRACTICAL DESIGNCompact (single-piece) trolley body is easyto washThe trolleys are equipped with an “Emergency“drawer with a top opening for fi rstaid and life-saving drugsFor safety reasons the handrails are shapedas part of the trolley bodyThe integrated protective strips around theentire trolley protect the trolley, surroundinginterior and service staffCentrally locked drawersBasic Aurion body can be equipped with morethan fi fty accessoriesMEGAEMERGENCYMEGAAMBULANTCOMPACTEMERGENCY 2resuscitation trolley 1/20 bandage trolley 2/20 resuscitation trolley3/2020instrument and universal trolleys

instrument and universal trolleysUNI metal trolley for universal use: externalUNI TROLLEY patient dep., wards, laboratoriesHigh functionalityWith a combination of accessories (stainlesssteel board, waste bin, plastic bag holder,plastic box extension) the UNI trolley suitablycomplements a purposefully designedworkplaceDimensions: width 60 cm, depth 50 cm,height 90 cm. Drawer depth 10 and 20 cm,75 mm diameter wheels, two with brakes.Removable inside plastic drawer sectionMetal construction, resistant plastic sideand work areaUNI TROLLEYUniversal usePractical accessoriesEasy maintenanceUNI 653 TROLLEYinstrument and universal trolleys1/21trolley 2/21under couch trolley, height 55 cm3/21Linet offers a whole range of instrumentand universal trolleys in various designsand equipment. The trolley constructionand accessories are adapted to the individualneeds of a specifi c department.Chromium or stainless steel tube constructionVarious accessories: stainless steeltrays, racks, partitions, bins, extendablework area, drawers, wire gridsAlternatively raised or lowered handrailsThe trolleys are anti-static4/21 5/216/21 7/218/21instrument and universal trolleys21

medical mobiliarymedical mobiliarySERVING TROLLEYA serving trolley with three high-pressurelaminate (HPL) removable shelves. Raisedshelf edges prevent objects falling. 125 mmdiameter wheels (2 with brakes), height98 cm, width 66 cm, length 100 cm.STORAGE WALL RACKSStainless steel or painted construction storagewall racks. Immobile, mobile (75 mm diameterwheels) and suspending, one-sidedor double-sided. Various types of baskets.1/22 2/22CLEANER TROLLEYSMobile trolley undercarriage is made of a chromiumtube construction. This is mounted witha chromium handle, buckets or plastic bagwith lid and further accessories. The trolley allowstouch-free cleaning.SORTING AND WASTECOLLECTION TROLLEYCleaner trolleys for waste or dirty linen consistof a mobile chromium frame, plastic lids andtextile or plastic bags. Foot control possible.3/22 4/22MANIPULATION TROLLEYSThe basic skeleton of the mobile manipulationtrolleys consists of a chromium constructionmounted with textile or plasticbags, removable plastic tubs and wire removablegridLINEN TROLLEYSVarious sized and shaped chromium constructiontrolleys with wire lining. With or withoutopening sides.5/22 6/22WIEGAND DRUG DISTRIBUTION SYSTEMThe system elements facilitate and sort drug distribution.The transparent 9×8×30 cm box has a name label and dividersUniversal tray for cups and dispensers (35 × 45 cm)Piccolo daily drug dispenserDrug crusher, cupsStainless steel wire basket for washing cups with lid7/2222medical mobiliary / full range at www.linet.cz

medical mobiliaryINFUSION STANDSMobile telescopic infusion stands consist offi ve-sided pedestal with fi ve 50 mm diameterdouble wheels (2 with brakes), rod andhooks (weight 6 kg/hooks). Stainless steelor chromium design.TIPPING BOXESTransparent tipping wall boxes suitable forstoring small medical material.Four-box: 600×207×168 mm,five-box: 600×164×133 mm.1/23 2/23medical mobiliarySCREENWhite painted metal construction mobilescreen, lined with a washable imitation leatherfabric. The screen has several interconnectingparts.TRANSFERABLE MATSThose mats for transferring a patient fromthe bed to a couch or operating table consistof a dural frame with transport rollers.Washable imitation leather surface. Dimensions:small 64×50 cm, big 115×57.5 cm.3/23 4/23STEPSSingle-level or two-level immobile steps arepainted, height of single-level 18 cm, heightof two-level 43 cm5/23Mobile steps and stools are made of a chromiumskeleton and rubber boards. They aremobile and when a greater weight is appliedthe wheels brake automatically.6/23DISPENSERSPlastic, metal or stainless steel soap, disinfectantand cream dispensers. A broadrange of designs and optional properties.7/23BOXESPlastic, painted metal or stainless steel toiletpaper or paper-towel boxes. Equippedwith an opening for checking the contentsand locks.8/23full range at www.linet.cz / medical mobiliary23

medical furnituremedical furnitureMEDLINThe medical furniture Medlin isdesigned for clinics, inspectionrooms, examination rooms or laboratories.Medlin medical furniturehas been designed andconstructed to meet the needsof medical personnel, this is reflected in the choice of materials,the components and the designof counter space.CustomisationExceptional functionalityPractical accessoriesEasy maintenanceMATERIAL AND IMPLEMENTATIONThe cabinets and drawers are built of compressedchipboard; the counter space is coatedwith high pressure laminated foil. Thecounter top can be implemented as well instainless steel or coriana. Additional materialsthat are used include plastics and metal.The exterior is usually fi nished in a light colour,the counter space, footstools and edgeof the leading counter are colourfully highlighted.The width of the lower and upper cabinets,as well as the drawers and the highcabinets is 45, 60 a 90 cm.INNER STORAGE SPACEThe shelves rest on a metal support witha stopper preventing unwanted movement,in order to prevent any sagging the shelvesare strengthened with a brace. The glassshelves are placed on special supports.The plastic water resistant drawers can betaken out from their metal holding frameFor well-arranged placement of content thedrawers can be internally subdividedThe metal drawer runners have a specialstopper at the end and together with nylonwheels operate easily and quietlyCONSTRUCTION ELEMENTSRounded aluminum handles are attachedwith screws through the doors and bodyof the drawers making it impossible to pullthem off. They are easily held.The doors are protected against noise whenclo sed by a plastic washerThe hanging upper metal cabinets are guaranteedto hold up to 130 kg, the suspendeddoors can open to an angle of 230° andhave a carrying capacity of 70 kg preventingthe doors from coming off of their hinges andenabling easy access to the cabinets1/24 2/243/2424medical furniture

RECORD CARTHINZmedical furnitureMoveable cart for medical documentation and distribution of medicinesContains a folding writing table, has the possibility of a suspended shelf for keepingthings organizedOption Hinz A: Two drawers, lockable drawer-pharmacy, drawer for supplementary documentation,space for placing RTG imagesOption Hinz B: lockable drawer-pharmacy, two open shelves, two drawers and space forplacing RTG imagesOption Hinz C: lockable drawer-pharmacy, one shelf, two drawers, fi ve removable boxes,space for placing RTG imagesDimensions: height 103.3 cm, length 55.6 cm, depth 60 cmmedical furnitureBCA1/25METALFILING CABINETS2/253/25Metal fi ling cabinets for A4 documentswith two, three, four or fi ve drawers,ma ximum possible load 32 kgMetal fi ling cabinets for A5 documentswith six or seven drawers, the maximumload per drawer is 20–26 kgSecured against tipping overFully extendable drawers, light andquiet operationCentral lockThe drawers can be equipped withpartitionsCLOTHES CABINETMetal cabinets or cabinets made from laminated compressed chipboard, dimensions accordingto the customer’s requirementsSubdivided with space for private and work clothes or without subdivisionAlso equipped with shelves, clothes pole and hook4/25METAL SHELVESShelves with a solid construction, useful for archives or storageVariable placement of shelves, shelves from laminated chipboardDimensions: width 90 cm, height 90, 180 or 270 cm, depth 40, 50 or 60 cmVariable number of shelves (3 – 7)Load capacity 250 kg per shelfPossibility of connecting multiple shelves together5/25full range at www.linet.cz / medical furniture25

office furnitureoffice furnitureThe offi ce furniture is offered in severaldifferent types and combinations.It is possible to combine individualpieces of furniture in order toacquire an interior design accordingto your own requirements.CustomisationPleasant designOptimal functionalityPractical accessoriesEasy maintenanceWIDE SELECTIONLinet offers a wide selection of offi ce furnitureincluding tables, cabinet arrangements,containers, chairs and other supplementsTables: writing, negotiating, conference, andother tables. Manager’s tables can be fi lledwith a selection of additional worktablesor cabinets in order to increase the totalworkspace.Cabinets: a wide selection of cabinets, extensionsand mobile or stationary containersCUSTOMIZATION ANDIMPLEMENTATIONThe basic material for the furniture is laminatedchipboard or inlayed chipboardIndividual components of the furniture canbe combinedNon-typical components can be added tothe basic types of furniture allowing designto be arranged down to the smallest detailsThe furniture is manufactured in many differentcolours and in various combinations. Itis possible to add additional designs accordingto the individual requirements.1/262/263/264/2626office furniture

Softlin furniture and couchesSOFTLINHigh functionalityLarge selection to choose fromSafePleasant appearanceEasy maintenanceSoftlinThe Softlin line of furniture is intended for equipping medical rooms. This fact is refl ected inthe choice of components and the materials used in its construction.Customisation: the Softlin furniture line offers many different combinations according to theneeds and space requirements of the customer. If one wishes to completely equip the room,it is possible to also take advantage of the chairs and couches provided by Softlin plus as wellas beds with wood lining and tables.Easy maintenance: the surface is from chipboard covered with wood coloured foilSafety in the details: rounded edges and corners on all upper surfaces (doors, drawers,edges of shelves), declining keys, fl exible grips reinforced with metal wireA footstool with an adjustable height, wide angles when opening doors1/27COUCHESAND CHAIRScouchesPleasant designCustomisationFunctionalSafetyThe couches and chairs are designed for retirementhomes or medical institutions, butalso for waiting rooms, nursing rooms, medicalroomsCustomisation: each of the complete setscomes with a footstool, recliner, couch andcoffee tableAssorted implementation: couches with robustor light construction (wood or metal),upholstering material (leather or felt), variousmaterialsAbility to select the upholstery material andthe shading of the wood2/273/27 Betty extendable couches4/27Softlin furniture and couches27

seating furnitureseating furnitureSOFTLINKOMFORT 04High functionalityMaximum comfortSafetyEasy operationSimple maintenanceA fi rth central wheel for ease of useArmrests makeit easy to get up from the chairThe chair hasa moveable leg restCOMFORT AND HYGIENEThe chairs are designed for strength andstability with a solid construction made frombeech woodThe cushions are removable and can be washed,the area beneath the seat cushion andfootrest is upholstered with washable leather.The separation of the seat cushion fromthe backrest allows for ease of cleaning.The possibility of upholstered leatherWhen transporting a client it is possible to reclinethe seat giving good support to the feet,which is not only comfortable but also safeSOFTLIN CHAIRIMPULS CHAIRARNO CHAIR1/282/283/28SIESTA PLUS MISTRAL BENCH TOSCA BENCH4/28 5/286/2828seating furniture / full range at www.linet.cz

seating furnitureELEKTRA OFFICE CHAIR ORION OFFICE CHAIR VEGA OFFICE CHAIRseating furniture1/29 2/29 3/29TEKTON 318 OFFICE CHAIR TEKTON 326 OFFICE CHAIR THOR CONFERENCE CHAIR4/29 5/29 6/29DOCTOR SEATSMARO 23001 AND MARO 23002MEDI 1253AND MEDI 1254 STOOLSANTISTATIC CHAIR7/29 8/29 9/29MAGNUS SHOWER CHAIRADJUSTABLE CHAIRRELAX 131MOBILE TOILETCHAIR KK9610/29 11/29 12/29full range at www.linet.cz / seating furniture29

LINET spol. s r. o.Želevčice 5274 01 SlanýCzech Republictel.: +420 312 576 111fax: +420 312 522 668e-mail: info @ linet.czwww.linet.cz1/2004