Standard Products Catalog - Omni Metalcraft Corp.

BALL TABLESBBall Tables are used when products need tobe manually rotated or correctly positioned,such as a work station or other operation thatrequires quick, easy handling of the product.Ball Transfer Tables are also used whentwo or more conveyor lines converge andpackages must be transferred from one lineto another.specifications• Lengths in 1" increments 1' to 12'• Between frame in 1" increments 10" to 48"• 1" diameter stud mount balls• Up to 200 lbs. per foot load capacity• Ceiling supports, floor supports, side guidesand end stops available• Powder coat finishes and galvanizedmaterial available*Expanded product parameters availableABALL TABLESRef.A 10" - 48"B 1' - 12'C 10" - 86"CA = Between Frame (BF)B = Overall Length (OAL)C = Top of BallSpacingBALL PATTERNS AND SPACINGSquarePatternNominalSpacingDiagonalPattern1 13/16"baLL TRANSFER UNIT• 1" diameter main ball• Zinc plated steel construction• 1/4 - 20 stud• 65 lb. per ball transfer load rating1 1/2"Ball SpacingSquare 2", 3", 4", 6"*Diagonal 3", 6"*Values are nominal. 2.8" and 5.7" actual2 3/8"1"Between Frame1/8" Standard5/16" Optional7/8"Cross Section for a 2 1/2" x 1" x 12 Ga. Frame1 1/2"Between FrameCross Section for a 3 1/2" x 1 1/2" x 10 Ga. Frame1/4"2 1/2"3 1/2"LOAD CAPACITY CHARTFRAME SIZESUPPORTCENTERFRAMECAPACITYMax. UniformlyDistributed LoadPer Foot (lbs.)BALLCAPACITYMax. Load PerBall5' 2602 1/2" x 1" x 12 ga.10' 35655' 6603 1/2" x 1 1/2" x 10 ga.10' 120Note: Maximum product weight should not exceed 150 lbs. as productmay only rest on 3 ball transfers at one time.Page 31