Standard Products Catalog - Omni Metalcraft Corp.

DRIVE SPECIFICATIONS208-230/460VAC - 3 Phase - 60 Hz• 190/380vac - 3 Phase - 50 Hz capable• Totally enclosed fan cooled• 1750 RPM• Inverter capable 4:1 speed ratio• 1.00 service factor• Sealed worm gear "C" face speed reducerDRIVE MOUNTING OPTIONS AVAILABLEUNDERHUNG DRIVE115/230VAC - 1 Phase - 60 hz• Totally enclosed fan cooled• 1750 RPM• 1.15 service factor• Sealed worm gear "C" face speed reducerSIDE MOUNTED DRIVECONVEYOR SPECIFICATIONSROLLERCENTERSMAXIMUM LENGTH (FEET) PER 1/4 HPFPM30 45 60 75 90 105 120MAXIMUM LENGTH PER DRIVE SECTION(FEET)ROLLERCENTERSDRIVESECTION ATENDDRIVESECTION ATCENTER1.5" 20 15 10 8.5 6.5 6 52" 26 20 13 11 8.5 7.5 6.53" 40 30 20 16.5 13 11.5 104" 50 37.5 25 21 17 15 136" 80 60 40 32.5 25 22.5 208" 100 75 50 41.5 33 29 251.5" 35 702" 45 903" 60 1204" 90 1806" 150 3008" 180 380STANDARD SPECIFICATIONSDRIVE SHAFT• 1 in. dia. steel shaft full length of conveyor• Delrin chain coupling at bed jointsDrive spools• 2 in. dia. Delrin spool held in place on shaft by "snap on" retaining clipsDrive belts• 3/16 in. dia. urethane belts from drive spools to rollersspeed reduction• "C" face speed reducer.• No. 50 chain from reducer to drive shaftPage 17