Standard Products Catalog - Omni Metalcraft Corp.
Standard Products Catalog - Omni Metalcraft Corp. Standard Products Catalog - Omni Metalcraft Corp.
CURVE SPECIFICATIONS45° CURVE 60° CURVENote: 45°, 60° and 90° curves are supplied with 12" tangents18"18"30° CURVEDRIVE SPECIFICATIONS208-230/460VAC - 3 Phase - 60 Hz• Totally enclosed fan cooled• 1750 RPM• Inverter capable 4:1 speed ratio• 1.00 service factor• Sealed worm gear "C" face speed reducer115/230VAC - 1 Phase - 60 hz• Totally enclosed fan cooled• 1750 RPM• 1.15 service factor• Sealed worm gear "C" face speed reducerPage 11
BDLR - STRAIGHT SPURBELT DRIVEN LIVE ROLLER STRAIGHT SPUR CONVEYORCBelt Driven Live Roller (BDLR) Straight SpurConveyors are a versatile way to conveyproducts off of a main line. They can conveyvarious shapes, sizes, and weights. Productssuch as boxes, cases, drums, and totes conveyeasily on BDLR Straight Spur Conveyors. Thislive roller spur can be self powered or slavedriven.ASpecifications• 30° and 45° spurs• Between frame in 1" increments 13" to 39"• Up to 600 FPM max speed• Up to 500 lbs. total live load capacity• Ceiling supports, floor supports and sideguides available• Powder coat finishes and galvanizedmaterial available*Expanded product parameters availableBRef. 1.9"A 13" - 39"B 22" - 90.5"C 33 1/8" - 53 1/4"D 54 1/8" - 105 1/2"E 30 7/8" - 62 1/4"F 28 3/4" - 40"DA = Between Frame (BF)B = Top of Roller (TOR)C = Short RailD = Long RailE = Trunk Line DisplacementF = Take Off DisplacementROLLER SPECIFICATIONS AND BEARING DETAILSROLLERDIAMETERBEARINGS TUBE DETAIL AXLE DETAILDetailswallThicknessROLLERSPACINGMAXLOAD PERROLLERGALVANIZED FRAMEMaterial Size Type Retention Centers lbs. 12 ga. Formed Channel1.9"Non-Precision orABEC Precision16 ga. Galvanized 7/16" Hex Spring 3" 260 6 1/2" deep x 1 1/2" flangenon-precision BEARING (NP)Non-Precision bearings are made of a stampedmetal housing with very loose tolerances. They arenot intended for very heavy loads or high speeds.precision Bearings (P)Precision Bearings are made from high quality steel,heat treated to uniform hardness and ground to amicro finish. The tolerances are much tighter thansemi-precision bearings making them capable ofgreater speeds and load capacities but sensitive toaxle deflection causing misalignment.Right HAndLeft HandPage 12
- Page 2: TABLE OF CONTENTSPages 2-7BELT CONV
- Page 8 and 9: DRIVE SPECIFICATIONS208-230/460 VAC
- Page 10 and 11: DRIVE SPECIFICATIONS208-230/460VAC
- Page 14 and 15: SPUR DETAILSETrunk Line BFF45°CDAN
- Page 16 and 17: ASPUR DETAILSETrunk Line BFC45°DFG
- Page 18 and 19: DRIVE SPECIFICATIONS208-230/460VAC
- Page 20 and 21: CURVE SPECIFICATIONS1 3/8" Diameter
- Page 22 and 23: SPUR DETAILS45°CDBETWEENFRAMEWIDTH
- Page 24 and 25: power supply• 24 VDC fixed output
- Page 26 and 27: MDR STRAIGHT DRIVESPECIFICATIONSpow
- Page 28 and 29: DRIVE SPECIFICATIONS208-230/460VAC
- Page 30 and 31: DRIVE SPECIFICATIONS208-230/460VAC
- Page 32 and 33: BALL TABLESBBall Tables are used wh
- Page 34 and 35: 2 3/8"3"2 11/32"1 3/4"1 3/4"1 3/4"S
- Page 36 and 37: ROLLER SPECIFICATIONSROLLER DIAMETE
- Page 38 and 39: ROLLER SPECIFICATIONSROLLER DIAMETE
- Page 40 and 41: CONVEYOR SPECIFICATIONSWHEEL HEIGHT
- Page 42 and 43: CONVEYOR SPECIFICATIONSWHEEL HEIGHT
- Page 44 and 45: NOTESPage 43
- Page 46: THE OPTIONSOffered in Powder Coat F
CURVE SPECIFICATIONS45° CURVE 60° CURVENote: 45°, 60° and 90° curves are supplied with 12" tangents18"18"30° CURVEDRIVE SPECIFICATIONS208-230/460VAC - 3 Phase - 60 Hz• Totally enclosed fan cooled• 1750 RPM• Inverter capable 4:1 speed ratio• 1.00 service factor• Sealed worm gear "C" face speed reducer115/230VAC - 1 Phase - 60 hz• Totally enclosed fan cooled• 1750 RPM• 1.15 service factor• Sealed worm gear "C" face speed reducerPage 11
Change language