11.07.2015 Views

Manual Doro Comfort 1015_v1.0

Manual Doro Comfort 1015_v1.0

Manual Doro Comfort 1015_v1.0

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Englishtake up to 10 minutes charging before display illuminates, if batteries aretotally empty.When the batteries are running low, will flash and a warning tone will beheard when a call is in progress. The warning tone is optional, see Handsetsettings (HS SETTINGS), p. 5 . The battery charge indicator in the displaywill flash as long as the handset is charging. In order to save the batteries, thedisplay is very dark on standby, press L once to illuminate. To save power,speaker and the display light ceases to operate at low battery strength. Whenthe battery is low or when there is too great a distance to the base unit thephone will be unable to connect to a line. Do not place the base unit close toother electrical equipment, this is to minimize the risk of any interference. It isnormal for the device to become warm during charging and this is not dangerous.RangeThe telephone’s range depends on whether or not the radio waves carryingthe call are restricted by obstacles in their path, and is usually between 50and 300 metres. Coverage can be improved by turning one’s head so that thehandset is aligned with the base unit. Sound quality declines as the limit isreached until the call is finally interrupted.Eco FunctionalityWe have introduced the ECO FUNCTIONALITY label to help customers identifyproducts within our assortment having a lower impact on the environment.Products carrying this label feature:• Reduced power consumption in both operational and standby.• Adaptive transmission power depending on range on base unit.TroubleshootingCheck that the telephone cord is undamaged and properly plugged in.Disconnect any additional equipment, extension cords and other phones. If theproblem is resolved, the fault is with some other equipment.Test the equipment on a known working line (e.g. at a neighbour’s house). Ifthe equipment works there the fault is probably with your telephone line. Pleasereport this to your network operator.No number shown when ringing• This function requires a Caller ID subscription from your service provider.Warning tone/Not possible to make calls• The batteries may be running low (charge the handset).• The hand unit may be nearly out of range. Move closer to a base unit.12

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!