switching from chlorine gas to sodium hypochlorite - Ohiowater.org
switching from chlorine gas to sodium hypochlorite - Ohiowater.org switching from chlorine gas to sodium hypochlorite - Ohiowater.org
One feed pump is dedicated tofeeding sodium hypochlorite solutionto the settled water flume.A second pump delivers sodiumhypochlorite solution to the filtereffluent but is also capable of feedinghypochlorite to other feed points inthe plant.A third pump is provided as a backup to either of the other two pumps.
Shipments of 12% - 15% sodium hypochlorite are received bytanker truck.The tanker truck connects to a Camlock quick connectcoupling on the exterior of the building and pumps directlyinto one or both of the bulk tanks.Exterior spill containment is provided at the loading station.Feed rate adjustment of the feed pumps can be performedlocally or remotely from the plant’s SCADA system.
- Page 1 and 2: OTCO Water WorkshopMarch 6, 2013Pre
- Page 4 and 5: •Aquarius WTP, located in LakeCou
- Page 7 and 8: Number of chlorinators: 2Maximum fe
- Page 10 and 11: A phased constructionapproach was u
- Page 14: Feed requirements (@ 15% trade solu
- Page 17 and 18: Elevated bulk storage tanks designe
- Page 19 and 20: Because of sodium hypochlorite’s
- Page 22 and 23: Spill Containment Wall
- Page 24 and 25: Finished Bulk Storage Tank Pad
- Page 26: Splitter Valves for (6) Filter Feed
- Page 29 and 30: Strength (%)An initial concern duri
- Page 31 and 32: Use of multiple individual dosing p
- Page 34 and 35: Since our startup in 2006 we have h
- Page 36 and 37: After: (PVC) Storage Tanks
- Page 38: New carrier water and sodiumhypochl
- Page 41: The Lake County Department of Utili
Shipments of 12% - 15% <strong>sodium</strong> <strong>hypochlorite</strong> are received bytanker truck.The tanker truck connects <strong>to</strong> a Camlock quick connectcoupling on the exterior of the building and pumps directlyin<strong>to</strong> one or both of the bulk tanks.Exterior spill containment is provided at the loading station.Feed rate adjustment of the feed pumps can be performedlocally or remotely <strong>from</strong> the plant’s SCADA system.
Change language