Contents - Electronic Fasteners Inc

H470/H470-1Automatic Crimping for Terminals on Tape• Fast safe, automatic terminal crimping with advanced Binary Air Logic Control design.• Requires regulated shop air supply for operation.• Crimps in excess of 3600 pieces per hour with speedchange capability• Quick change dies crimp a full range of insulated andnon-insulated terminals from 26 through 4 AWG wiresizes• Can be operated manually or in automatic mode• Easy and safe to use, feed, and change dies• Requires normal 80-105 psi shop air• Terminal crimping reels are top-mounted on an integralsupport bracket• Double index capability (H470-1) for #8 through #4AWG terminal crimping• No electrical connection requiredOPERATIONAutomatic ModeThe foot pedal is held down continuously, and strippedwire ends are inserted into terminal.Sensor activates machine only when wire is in exactposition, providing best possible crimp.Permits unskilled labor to use the machine.Manual ModeThe operator places stripped wire end in the terminalbetween the crimping jaws and depresses the foottreadle. Foot treadle actuates the crimping jaws.TermsH470 and H470-1 units can be leased or purchased.Contact Hollingsworth for details.FASTThe H470 and H700-1 operates as fast asyour fastest operator can insert strippedwire ends. Terminals are captivatedbetween crimps for stable fixed "target".FOOLPROOFDies are held in place with just twoscrews. Precise, built-in, foolproof diealignment -- you can't insert themwrong.TROUBLE-FREESmooth-operating, problem-freeejector mechanism ejects crimpedterminals. Machine is virtually jamproof.63