DATA BOOK - BVT Partners OÃ
DATA BOOK - BVT Partners OÃ DATA BOOK - BVT Partners OÃ
(4) Drain up kit(a) Part No. : RDU12E(b) AccessoriesNo.1234NameDrain pumpDrain hoseHose clampTapping screwQty.1114(c)Installation of drain up kit455Unit: mmIndoor unit740254230224Max. 500Control24124186VIEW A267 176 62Fitting for drain hoseVinyl chloride pipe VP-25(d)AInstallation of drain up kit1) Fix the drain up kit on the right side of theinside unit with tap screws.2) Insert the drain hose fully and securely tothe drain sockets of the inside unit and thedrain up kit.3) Connect the drain up kit’s connectors for thedrain pump (red color 2P) and the floatswitch (black 2P) to the connectors of thecontrol box. (The control box’s connectorsfor the drain pump and the float switch arealso red and black respectively.) Note thatthe control’s connector for the float switchis already connected to the inside unit’s connectorfor the float switch, so disconnectthem and connect it to the drain up kit’s connectorfor the float switch .2 Drain hose4 Tapping screwWHRDBKBURDFor indoor unitBKWH BKRDBURDWHYEFor indoor unitFor float switchFor drain pump- 237-4 -
4) Use hard PVC general purpose pipes VP-25 sold in the marketfor drain pipes after draining up.5) Tighten the PVC pipe securely with the attached clamp afterinserting it in the drain socket.6) The drain pipe must have downward inclination gradient of 1/100 or more, and take care not to make a trap or uphill pass.7) When connecting the drain pipe, take care not to apply force onthe pipe of the unit, and clamp the pipe as close as possible tothe unit.8) Don’t attach air purge pipe, because the drain might spout.9) Be sure to provide heat insulation to the indoor side drain pipe.Down gradient(1/100 or more)3 Hose clampDrain hoseUp hillpassTrap- 237-5 -
- Page 191 and 192: Indoor unitcombination5room6roomRoo
- Page 193 and 194: Indoor unitcombination1room2room3ro
- Page 195 and 196: Indoor unitcombination4roomRoom coo
- Page 197 and 198: Indoor unitcombination5room6roomCoo
- Page 199 and 200: Indoor unitcombination1room2room3ro
- Page 201 and 202: Indoor unitcombination4roomRoom hea
- Page 203 and 204: Indoor unitcombination5room6roomRoo
- Page 205 and 206: '11 • SCM-DB-1096. SELECTION CHAR
- Page 207 and 208: te controllerly unexpected stress o
- Page 209 and 210: The functional settingThe initial f
- Page 211 and 212: y defined as following table.it.flo
- Page 213 and 214: ote controllerto apply unexpected s
- Page 215 and 216: '11 • SCM-DB-109The functional se
- Page 217 and 218: s automatically defined as followin
- Page 219 and 220: Remote controllerInstallation of th
- Page 221 and 222: 3 '11 • SCM-DB-109
- Page 223 and 224: 3 4 '11 • SCM-DB-109 - 222 -
- Page 225 and 226: '11 • SCM-DB-1094 Remotecontrolle
- Page 227 and 228: Remote control installation dimensi
- Page 229 and 230: - 228 - How to set functions by but
- Page 231 and 232: failure.2 cores× 2 cores× 2 cores
- Page 233 and 234: '11 • SCM-DB-109Installation of t
- Page 235 and 236: '11 • SCM-DB-109Connection of wir
- Page 237 and 238: 7.5 Superlink E board (SC-ADNA-E) P
- Page 239 and 240: 7.6 Ducted type (SRRM) optional par
- Page 241: Air flow and external static pressu
- Page 245 and 246: - 239 - PJZ012D076'11 • SCM-DB-10
4) Use hard PVC general purpose pipes VP-25 sold in the marketfor drain pipes after draining up.5) Tighten the PVC pipe securely with the attached clamp afterinserting it in the drain socket.6) The drain pipe must have downward inclination gradient of 1/100 or more, and take care not to make a trap or uphill pass.7) When connecting the drain pipe, take care not to apply force onthe pipe of the unit, and clamp the pipe as close as possible tothe unit.8) Don’t attach air purge pipe, because the drain might spout.9) Be sure to provide heat insulation to the indoor side drain pipe.Down gradient(1/100 or more)3 Hose clampDrain hoseUp hillpassTrap- 237-5 -