DATA BOOK - BVT Partners OÃ
DATA BOOK - BVT Partners OÃ DATA BOOK - BVT Partners OÃ
7.4 Interface Kit (SC-BIKN-E)'11 • SCM-DB-109RKZ012A088 aSafety precautionsBefore use, please read these Safety Precautions thoroughlybefore installation.Accessories included in package●All the cautionary items mentioned below are important safety related items to be takeninto consideration, so be sure to observe them at all times.Be sure to check all the accessories included in package.Incorrect installation could lead to serious consequences such as death, majorNo.Part nameQuantityWarninginjury or envirommental destruction.1 Indoor unit's connection cable (cable length: 1.8m) 1 ●Symbols used in these precautions2 Wood screws (for mounting the interface: ø4x 25) 23 Tapping screws (for the cable clump and the interface mounting bracket) 3Always go along these instruction.4 Interface mounting bracket1●After completed installation, carry out trial operation to confirm no anomaly, and ask the5 Cable clamp (for the indoor unit's connection cable) 1 user to keep this installation manual in a good place for future reference.Warnings●Installation must be carried out by a qualified installer.If you install it by yourself, it may cause an electric shock, fire and personal injury , as a result of a system malfunction.●Install it in full accordance with the instruction manual.Incorrect installation may cause an electric shock, fire and personal injury.●Electrical work must be carried out by a qualified electrician in accordance with the technical standard for electrical equipment, theindoor wiring standard and this instruction manual.Incorrect installation may cause an electric shock, fire and personal injury.●Use the specific cables for wiring. And connect all the cables to terminals or connectors securely and clamp them with cable clamps inorder for external forces not to be transmitted to the terminals directly.Incomplete connection may cause malfunction, and lead to heat generation and fire.●Use the original accessories and specified components for installation.If the parts other than those prescribed by us are used, it may cause an electric shock, fire and sersonal injury.Connecting the indoor unit's connection cable to the interfaceWiring inlet(top or back)3 Fix the cable with the1Remove the upper case of the interface.cable clamp• Remove 2 screws from the interface casing before removal of upper casing.2Connect the indoor unit's2Connect the indoor unit's connection cable to the interface.connection cable• Connect the connector of the indoor unit connection cable to theconnector on the interface’s circuit board.3Fix the indoor unit's connection cable with the cable clamp.• Cable can be brought in from the top or from the back.• Cut out the punch-outs for the connection cables running into the casing with cutter.4Connect the indoor unit's connection cable to the indoor control PCB.• Connect the indoor unit's connection cable to the indoor control PCB securely. 1Remove• Clamp the connection cable to the indoor control box securely with the cable clamp the upperprovided as an accessory.case• Regarding the cable connection to the indoor unit, refer to the instruction manual forindoor unit.Name of each part of the interfaceClamp for clamping indoorROM terminalunit's connection cableInterface boardDIP switch (SW2) : [Factory setting : all ON]Terminal for indoor unit'sDIP switch (SW3) : [Factory setting : all OFF]connection cableTerminal block for wiredremote controller*Rotary switch (SW1) for address settingCNT terminalTerminal block for super link E board (SC-ADNA-E)*Clamp for clamping the connectionClamp for clamping the connection cable forcable for wired remote controller*super link E board (SC-ADNA-E)**Either the connection cables of super link E board (SC-ADNA-E) or of wired remote controller is connectable.Switch SettingFunctionSwitch SettingFunctionSW2-1ON** CNT level inputON** External input (CNT input)SW2-3OFF CNT Pulse inputOFF Operation permission/prohibition (CNT input)SW2-2ON** Wired remote controller : ValidON** Heat pumpSW2-4OFF Wired remote controller : InvalidOFF Cooling only** Factory setting
'11 • SCM-DB-109Installation of the interface・Install the interface within the range of the connection cable length(approximately 1.3m) from the indoor unit.・Be sure not to extend the connection cable on site. If the connectionWiring inletcable is extended, malfunction may occur.・Fix the interface on the wall, pillar or the like.DO NOT install the interface and wired remote controller at thefollowing places.○Places exposed to direct sunlight○Places near heating devices○High humidity places○Surfaces where are enough hot or cold to generate condensation○Places exposed to oil mist or steam directly○Uneven surfaceCut out the punch-outsfor the connection cablesrunning into the casingWiring inletMounting the interface directly on a wallwith cutter1Mount the lower casing of the interface on a flat surface with woodscrews provided as standard accessory.2Mount the upper casing.2Mount theupper casing1 Mount it on a wall or a pillarwith 2 of wood screwsRecessing the interface in the wallConnection cable1Recess the electrical box (locally procured) andconnection cables in the wall.2Mount the lower casing of the interface to theelectrical box with M4 screws (locally procured).3Mount the upper casing.1Recess the electrical2Mount it to the electrical boxbox and connection cableswith 2 of M4 screwsElectrical box(procured locally)(procured locally) 3Mount the upper casingMounting the interface with the mounting bracket1Mount the mounting bracket to the interface with tappingscrews provided as standard accessory.2Mount the mounting bracket on wall or the like with woodscrews provided as standard accessory.3Mount the mounting bracket to a wall surface, etc.using the wood screws provided.2Mount the mounting3Mount the bracket onbracket on the interfacea wall or a pillar withwith 2 of tapping screws2 of wood screwsInstallation check items□ Are the connection cables connected securely to the terminal blocks and connectors?□ Are the thickness and length of the connection cables conformed with the standard?- 232 -
- Page 181 and 182: Indoor unitcombination3room4roomRoo
- Page 183 and 184: Indoor unitcombination1room2room3ro
- Page 185 and 186: Indoor unitcombination4room5roomRoo
- Page 187 and 188: Indoor unitcombination6roomRoom coo
- Page 189 and 190: Indoor unitcombination4roomRoom hea
- Page 191 and 192: Indoor unitcombination5room6roomRoo
- Page 193 and 194: Indoor unitcombination1room2room3ro
- Page 195 and 196: Indoor unitcombination4roomRoom coo
- Page 197 and 198: Indoor unitcombination5room6roomCoo
- Page 199 and 200: Indoor unitcombination1room2room3ro
- Page 201 and 202: Indoor unitcombination4roomRoom hea
- Page 203 and 204: Indoor unitcombination5room6roomRoo
- Page 205 and 206: '11 • SCM-DB-1096. SELECTION CHAR
- Page 207 and 208: te controllerly unexpected stress o
- Page 209 and 210: The functional settingThe initial f
- Page 211 and 212: y defined as following table.it.flo
- Page 213 and 214: ote controllerto apply unexpected s
- Page 215 and 216: '11 • SCM-DB-109The functional se
- Page 217 and 218: s automatically defined as followin
- Page 219 and 220: Remote controllerInstallation of th
- Page 221 and 222: 3 '11 • SCM-DB-109
- Page 223 and 224: 3 4 '11 • SCM-DB-109 - 222 -
- Page 225 and 226: '11 • SCM-DB-1094 Remotecontrolle
- Page 227 and 228: Remote control installation dimensi
- Page 229 and 230: - 228 - How to set functions by but
- Page 231: failure.2 cores× 2 cores× 2 cores
- Page 235 and 236: '11 • SCM-DB-109Connection of wir
- Page 237 and 238: 7.5 Superlink E board (SC-ADNA-E) P
- Page 239 and 240: 7.6 Ducted type (SRRM) optional par
- Page 241 and 242: Air flow and external static pressu
- Page 243 and 244: 4) Use hard PVC general purpose pip
- Page 245 and 246: - 239 - PJZ012D076'11 • SCM-DB-10
'11 • SCM-DB-109Installation of the interface・Install the interface within the range of the connection cable length(approximately 1.3m) from the indoor unit.・Be sure not to extend the connection cable on site. If the connectionWiring inletcable is extended, malfunction may occur.・Fix the interface on the wall, pillar or the like.DO NOT install the interface and wired remote controller at thefollowing places.○Places exposed to direct sunlight○Places near heating devices○High humidity places○Surfaces where are enough hot or cold to generate condensation○Places exposed to oil mist or steam directly○Uneven surfaceCut out the punch-outsfor the connection cablesrunning into the casingWiring inletMounting the interface directly on a wallwith cutter1Mount the lower casing of the interface on a flat surface with woodscrews provided as standard accessory.2Mount the upper casing.2Mount theupper casing1 Mount it on a wall or a pillarwith 2 of wood screwsRecessing the interface in the wallConnection cable1Recess the electrical box (locally procured) andconnection cables in the wall.2Mount the lower casing of the interface to theelectrical box with M4 screws (locally procured).3Mount the upper casing.1Recess the electrical2Mount it to the electrical boxbox and connection cableswith 2 of M4 screwsElectrical box(procured locally)(procured locally) 3Mount the upper casingMounting the interface with the mounting bracket1Mount the mounting bracket to the interface with tappingscrews provided as standard accessory.2Mount the mounting bracket on wall or the like with woodscrews provided as standard accessory.3Mount the mounting bracket to a wall surface, etc.using the wood screws provided.2Mount the mounting3Mount the bracket onbracket on the interfacea wall or a pillar withwith 2 of tapping screws2 of wood screwsInstallation check items□ Are the connection cables connected securely to the terminal blocks and connectors?□ Are the thickness and length of the connection cables conformed with the standard?- 232 -