Here - 1000 BiT

THE RECORDER HAS A "TRIP MILEAGE INDICATOR" LIKE A CARThe recorder has a little counter to keep track of where you are on the tape. When yourewind the tape, push the button beside the counter to make it read zero.Then before you SAVE a program, write the counter number and the program name onthe cassette label so you will know where on the tape the program starts.When you LOAD, use the "fast forward" key (F.FWD) to get close to the spot whereyour program is on the tape.WHERE IS THE END OF THE TAPE?Are you the careless type? Do you sometimes forget what programs are on your tapes?Here is how to find out:1. Rewind the tape and zero the counter. Then enterVERIFYand press PLAY2. The computer will write the name of the first program on the screen. Then it will verifythe program and write9VERIFY ERROR3. Now you know the name of the first program and the counter reading at its end. DoVERIFY again and get the second program's name. Keep doing this until thecomputer doesn't find any more programs. The last counter number you wrote downshows where you should start if you want to put another program on that tape.Assignment 14:1. SAVE, LOAD and VERIFY several small programs on the same tape.2. How do you find where on the tape the last program ends (so you can put a new oneon the end)?86