INSTRUCTION AND MAINTENANCE MANUAL FOR JABIRU 2200 ...

Jabiru Aircraft Pty LtdInstruction & Maintenance ManualJabiru 2200 Aircraft EngineHydraulic Valve Lifter Models10.3 Run-In Checks1. PreliminaryPaperwork CompleteSufficient FuelCorrect Oil LevelAll Connections Correct and Secure2. Start RunStart Time _____________End Time _____________3. Ignition Checks (repeat a couple of times for each side)Left Side1000/2000 rpmRight Side 1000/2000 rpm4. Oil LeaksCheck Visually5. InstrumentsWorking and Correct Range6. IdleCheck idle screw (3/4 to 1 turn out)7. General RunningSmoothnessNoisesManifold Sealing8. Oil Pressure and Temp9. Check Ignition light to Tacho Test Rig (Top End RPM)10. Check alternator Charging Voltage10.4 Jabiru 2200 – Engine Post Run Procedure1. Heads retorqued 32 Nm (24 ft/lb). Valves Adjusted.2. Check induction/exhaust bolts.3. Any changes to be made.4. Rerun, check for oil leaks and/or any modificationsmade (oil pressure/leaks etc).5. Check charging rate of alternator Volts6. Leak Down80 80 80 80Cyl 1 2 3 4SIGNDATE7. Check all paper work8. Drain fuel/oil. Prepare for Shipment.This document is controlled while it remains on the Jabiru server. Once this no longer applies the document becomes uncontrolled.REVISION 0 1 2 3 4 5 6 7 8 9 Dated : June 2010 Issued By: DPS Page: 97 of 116L:\files\Manuals_For_Products\Engine_Manuals\Transition\JEM2204-9_I&M_unsigned.docx