INSTRUCTION AND MAINTENANCE MANUAL FOR JABIRU 2200 ...

Jabiru Aircraft Pty LtdInstruction & Maintenance ManualJabiru 2200 Aircraft EngineHydraulic Valve Lifter Models9.11 Subassembly F – Component Assembly ProcedureGear CaseStage2No. Details Sign Sign DateF1 Deburr, clean and inspect all of the gearsF2 Measure the shaft post internal diametersand the distributor shaft diametersF3 Using loctite 515 fit the shaft posts to thegear housingF4 Fit the distributor shaft seals and rearcrankshaft sealF5 Fit shafts to gears with 24 hour aralditeF6 Fit the distributor shafts and gears to thegear housingF7 Check end clearance of distributor shaft tocase flangeF8 Stage Inspection of AssemblyI hereby certify that the subassembly has been completed using the approved proceduresand data; and is fit for installation.Signed: _______________Date: ____________For Jabiru Aircraft Pty LtdProduction Certificate #444128Notes:This document is controlled while it remains on the Jabiru server. Once this no longer applies the document becomes uncontrolled.REVISION 0 1 2 3 4 5 6 7 8 9 Dated : June 2010 Issued By: DPS Page: 91 of 116L:\files\Manuals_For_Products\Engine_Manuals\Transition\JEM2204-9_I&M_unsigned.docx