INSTRUCTION AND MAINTENANCE MANUAL FOR JABIRU 2200 ...

Jabiru Aircraft Pty LtdInstruction & Maintenance ManualJabiru 2200 Aircraft EngineHydraulic Valve Lifter Models9.5 Subassembly C – Component Assembly ProcedurePistons, Cylinders and Cylinder HeadsNo. Details Sign DateC1 Clean and deburr all partsC2 Record all measurementsC3 Install pushrod tube “O” RingsC4 Check valve seats, fit spring retainers,install valvesC5 Fit intake pipes to headsC6 Complete rocker shafts and rockerassembliesC7 Fit cylinder base “O” ringsC8 Fit front circlipC9 Check ring end gaps, fit rings to pistonsC10 Install piston assembly to cylinder just clearof the oil ringI hereby certify that the subassembly has been completed using the approved proceduresand data; and is fit for installation.Signed: _______________Date: ____________For Jabiru Aircraft Pty LtdProduction Certificate #444128Notes:This document is controlled while it remains on the Jabiru server. Once this no longer applies the document becomes uncontrolled.REVISION 0 1 2 3 4 5 6 7 8 9 Dated : June 2010 Issued By: DPS Page: 85 of 116L:\files\Manuals_For_Products\Engine_Manuals\Transition\JEM2204-9_I&M_unsigned.docx