INSTRUCTION AND MAINTENANCE MANUAL FOR JABIRU 2200 ...
Share Embed Flag
Download ePaper

INSTRUCTION AND MAINTENANCE MANUAL FOR JABIRU 2200 ...

INSTRUCTION AND MAINTENANCE MANUAL FOR JABIRU 2200 ... INSTRUCTION AND MAINTENANCE MANUAL FOR JABIRU 2200 ...

jabiru.net.au
from jabiru.net.au More from this publisher
11.07.2015 Views

Jabiru Aircraft Pty LtdInstruction & Maintenance ManualJabiru 2200 Aircraft EngineHydraulic Valve Lifter ModelsE2Use a spring scale and a prop cap screw as per drawing to test ignition magnetstrength. Pull off should be 1.5 to 2.5 kg (3.3 to 5.5 lbs)E3Figure 25. Drawing 9437064 – Magnet Pull Test FlywheelUse spring scale and prop cap screw as in E2 to test alternator magnets. Pull offshould be 1.5 to 2.5 kg (3.3 to 5.5 lbs).Figure 26. Drawing 9438064 – Magnet Pull Test AlternatorE4Ignition Coil Inspection1. Using a multimeter measure the primary resistance (from the earth terminalto the iron core). It should be 0.8 Ω to 1.0 Ω.This document is controlled while it remains on the Jabiru server. Once this no longer applies the document becomes uncontrolled.REVISION 0 1 2 3 4 5 6 7 8 9 Dated : June 2010 Issued By: DPS Page: 56 of 116L:\files\Manuals_For_Products\Engine_Manuals\Transition\JEM2204-9_I&M_unsigned.docx

Jabiru Aircraft Pty LtdInstruction & Maintenance ManualJabiru 2200 Aircraft EngineHydraulic Valve Lifter ModelsFigure 27. Drawing 9439064 – Ignition Primary Resistance2. Measure the secondary resistance (from the high tension lead to the ironcore) it should be between 5.9 KΩ to 7.1 KΩ.Alternator InspectionFigure 28. – Ignition Secondary ResistanceE5 1. Use multimeter to test resistance of windings. Resistance should be 0.5Ωto 1.1 Ω.2. Use multi meter to test resistance to ground. Resistance should be infiniteThis document is controlled while it remains on the Jabiru server. Once this no longer applies the document becomes uncontrolled.REVISION 0 1 2 3 4 5 6 7 8 9 Dated : June 2010 Issued By: DPS Page: 57 of 116L:\files\Manuals_For_Products\Engine_Manuals\Transition\JEM2204-9_I&M_unsigned.docx

Jabiru Aircraft Pty LtdInstruction & Maintenance ManualJabiru <strong>2200</strong> Aircraft EngineHydraulic Valve Lifter ModelsE2Use a spring scale and a prop cap screw as per drawing to test ignition magnetstrength. Pull off should be 1.5 to 2.5 kg (3.3 to 5.5 lbs)E3Figure 25. Drawing 9437064 – Magnet Pull Test FlywheelUse spring scale and prop cap screw as in E2 to test alternator magnets. Pull offshould be 1.5 to 2.5 kg (3.3 to 5.5 lbs).Figure 26. Drawing 9438064 – Magnet Pull Test AlternatorE4Ignition Coil Inspection1. Using a multimeter measure the primary resistance (from the earth terminalto the iron core). It should be 0.8 Ω to 1.0 Ω.This document is controlled while it remains on the Jabiru server. Once this no longer applies the document becomes uncontrolled.REVISION 0 1 2 3 4 5 6 7 8 9 Dated : June 2010 Issued By: DPS Page: 56 of 116L:\files\Manuals_For_Products\Engine_Manuals\Transition\JEM2204-9_I&M_unsigned.docx

logo

products

Resources

Company

Terms of service
Privacy policy
Cookie policy
Cookie settings
Imprint
Change language
Made with love in Switzerland
© 2024 Yumpu.com all rights reserved

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!