INSTRUCTION AND MAINTENANCE MANUAL FOR JABIRU 2200 ...

Jabiru Aircraft Pty LtdInstruction & Maintenance ManualJabiru 2200 Aircraft EngineHydraulic Valve Lifter ModelsFigure 10. Drawing 9448064 – Cam Gear AssyA9Stage Inspection by 2nd person of Sub-Assembly7.5.1.2 Sub-Assembly B – Crankcase and CamshaftB11. Clean crankcase, remove old Loctite and clean oil galleries2. Visually inspect crankcaseB2B3B4B5B6Fit inner stud O Rings with a small smear of rubber grease or relevant lubricant.Inspect all studs for tightness threads and stretchingCheck oil suction pipe for security, replace O-ring.Fit oil relief valve assembly, oil pressure sender and front plug/hourmeter switch.Relief washer should have a bevel to accept plunger (relief poppet). To increase oilpressure 1 or 2 AN4 washers can be placed behind the relief spring.1. Lightly blue bearing shells and one crankcase half2. Fit bearing shells.This document is controlled while it remains on the Jabiru server. Once this no longer applies the document becomes uncontrolled.REVISION 0 1 2 3 4 5 6 7 8 9 Dated : June 2010 Issued By: DPS Page: 45 of 116L:\files\Manuals_For_Products\Engine_Manuals\Transition\JEM2204-9_I&M_unsigned.docx