INSTRUCTION AND MAINTENANCE MANUAL FOR JABIRU 2200 ...

Jabiru Aircraft Pty LtdInstruction & Maintenance ManualJabiru 2200 Aircraft EngineHydraulic Valve Lifter Models6.11.1 PropellerCheck spinner, spinner flange, screws, prop, tension, spinner and prop tracking.CAUTION:The maintenance schedules given in this manual are designed for engines whichuse a propeller and propeller flange approved by Jabiru Aircraft Australia.Jabiru Aircraft strongly recommend owners using non-approved parts follow asystem of extra preventative maintenance checks to monitor their engine –particularly propeller installation and flywheel attachment.Airworthiness and issues when claiming upon Jabiru’s Limited, Express Warrantymay also result.6.11.2 EngineCarburettor, carburetor heat system, carburetor attachmentAir filterEngine baffles and air ductsFront crankcase sealHoses, lines and fittingsIntake system.Exhaust system, including muffler, springs and heat muffIgnition harness, spark plugs, coils, distributor caps and rotorsElectrical wiring, starter, solenoid and electrical connections.Fuel pumpEngine controls and linkagesEngine mount rubbers & mount structure.Oil system tubes and hoses, oil cooler. Oil & filter change and filter inspection if due.FirewallEngine cowlings and clipsAll SCAT Hoses and Clamps.6.11.3 Fuel SystemFuel filterFuel drain valveCarburetor bowlFuel tank vent, cap and placardsFuel shut-off valve and placardsElectronic fuel boost pump and fittingsFuel lines and connectors, fire sleeves.This document is controlled while it remains on the Jabiru server. Once this no longer applies the document becomes uncontrolled.REVISION 0 1 2 3 4 5 6 7 8 9 Dated : June 2010 Issued By: DPS Page: 34 of 116L:\files\Manuals_For_Products\Engine_Manuals\Transition\JEM2204-9_I&M_unsigned.docx