INSTRUCTION AND MAINTENANCE MANUAL FOR JABIRU 2200 ...

More documents

Recommendations

Info

Jabiru Aircraft Pty LtdInstruction & Maintenance ManualJabiru 2200 Aircraft EngineHydraulic Valve Lifter Models3.7 Operating Speeds and Limits3.7.1 Ground Operating LimitsIdle Speed900 RPM (set while engine is hot)Oil Pressure – Idle Min 80 kPa (11 psi)Max 525 kPa (76 psi)Oil Temperature:Max. 100°C (212°F)Max. CHT 180 o C (356 o F)Note: If ground temperature limits are reached, shut the engine down or cool it bypointing the aircraft into wind.3.7.2 In-Flight Operating LimitsMaximum Speed3300 RPMMaximum Continuous Speed3300 RPMIdle Speed900 RPM (set while engine is hot)Oil Pressure – Normal Operations Min 220 kPa (31 psi)Max 525 kPa (76 psi)– Idle Min 80 kPa (11 psi)– Starting & Warm up Max 525 kPa (76 psi)Oil Temperature: Min 15 ° C (59 ° F)Max. 118 o C (244 ° F)Oil Continuous Temperature 80 - 100°C (176 ° - 212 ° F)Max. CHT (Climb)200°C (392°F)Max Continuous CHT (Cruise) 180 o C (356 o F)Notes:- Time with CHT at between 180°C and 200°C is not to exceed 5 Minutes- (Read Cylinder Head Temperature – CHT – under the spark plug nearestto the exhaust on the hottest cylinder).EGT Continuous Limits:EGT (Mid-Range / Cruise): Min 680° - 720°C (1256° - 1328°F)EGT (Above 70% Power): Min 640° - 680°C (1184° - 1256°F)Note: An EGT gauge is not included as standard equipment on the Jabiru 2200 engine,though a system can be supplied as an option.3.8 Propeller Selection & SpecificationsWARNING:Correct propeller selection, tuning and maintenance are vital for the safe operationof this engine. The guidance given herein and in the Engine Installation Manualmust be adhered to for safe operation. Propeller selection is discussed in detail in the Jabiru 2200 Engine Installation Manual. Many propeller brands and models are not approved by Jabiru Aircraft. Operatorsmay choose to use these propellers, however they do so at their own risk. Forinformation on which propellers are approved, please contact Jabiru P/L or our localrepresentative. 2-bladed, fixed-pitch wooden propellers manufactured by reputable companies arerecommended by Jabiru Aircraft.This document is controlled while it remains on the Jabiru server. Once this no longer applies the document becomes uncontrolled.REVISION 0 1 2 3 4 5 6 7 8 9 Dated : June 2010 Issued By: DPS Page: 14 of 116L:\files\Manuals_For_Products\Engine_Manuals\Transition\JEM2204-9_I&M_unsigned.docx
Jabiru Aircraft Pty LtdInstruction & Maintenance ManualJabiru 2200 Aircraft EngineHydraulic Valve Lifter Models All propellers must be maintained in accordance to the propeller manufacturer’srequirements in conjunction with Jabiru Aircraft P/L requirements. A maximum moment of inertia of 0.25 kgm 2 is recommended for the propellerassembly.3.9 DimensionsFigure 1. Drawing 9404041/1 Engine DimensionsThis document is controlled while it remains on the Jabiru server. Once this no longer applies the document becomes uncontrolled.REVISION 0 1 2 3 4 5 6 7 8 9 Dated : June 2010 Issued By: DPS Page: 15 of 116L:\files\Manuals_For_Products\Engine_Manuals\Transition\JEM2204-9_I&M_unsigned.docx
Page 1 and 2: INSTRUCTION AND MAINTENANCE MANUALF
Page 3 and 4: Jabiru Aircraft Pty LtdInstruction
Page 13: Jabiru Aircraft Pty LtdInstruction
Page 17 and 18: kWkWNmNmJabiru Aircraft Pty LtdInst
Page 65 and 66:
Jabiru Aircraft Pty LtdInstruction
Page 67 and 68:
Page 69 and 70:
Page 71 and 72:
Page 73 and 74:
Page 75 and 76:
Page 77 and 78:
Page 79 and 80:
Page 81 and 82:
Page 83 and 84:
Page 85 and 86:
Page 87 and 88:
Page 89 and 90:
Page 91 and 92:
Page 93 and 94:
Page 95 and 96:
Page 97 and 98:
Page 99 and 100:
Page 101 and 102:
Page 103 and 104:
Page 105 and 106:
Page 107 and 108:
Page 109 and 110:
Page 111 and 112:
Page 113 and 114:
Page 115 and 116:
show all

INSTRUCTION AND MAINTENANCE MANUAL FOR JABIRU 2200 ...

Create successful ePaper yourself

Delete template?

Save as template?