Propellers • Sterngear • Couplings • Bearings - Sillette-Sonic Ltd.

INBOARD FLANGE FOR PSS/TIDES SEAL ETC.To order, advise "d" and any special requirementsshaft range "d" inside dia. "C" as std. std. tube dia. "D" "E" std. bolt Std. Priceof your hose thread 12 t.p.i centres7/8" to 1 1/8" 1 1/4" to 1 3/4" 3 3/8" 1 1/2" 4" £150.0022mm to 28mm1 1/4" to 1 1/8" 1 3/4" to 2 1/4" 3 1/2" 1 3/4" 4 1/2" £195.0030mm to 35mm1 1/2" to 1 3/4" 2 1/2 to 3 1/8" 2 5/8" 2" or 2 1/4" 4 holes 4 1/2" PCD £170.0040mm to 45mm flat back round flangeRIGID INBOARD GLANDTo Order: for shaft "C" as std. std. tube dia. "D" "E" std. bolt Std. PriceSelect shaft dia. dia. "d" thread 12 t.p.i centresand anynon-standard 7/8" to 1" 3 1/4" 1 1/2" 4" £240.00requirements 22mm to 25mm1 1/8" to 1 3/8" 3 1/2" 1 3/4" 4" to 4 1/2" £280.0028mm to 35mm1 1/2" & 40mm 3 1/2" 2" 4 holes 4 1/2" PCD £365.00round flange1 3/4" & 45mm 3 1/2" 2 1/2" 4 holes 4 1/2" PCD £410.00round flangeFLEXIBLE INBOARD GLANDwith nut type gland (stud type over 1 3/8" / 35mm)To Order for shaft approx "C" standard "D" Pricespecify "d"dia. "d"shaft dia. andconfirm "D" 3/4" / 20 5" / 127 1 1/4" / 32 - 2" / 51 £200.007/8" / 22 5" / 127 1 1/2" / 38 - 2" / 51 £200.001" / 25 5" / 127 1 1/2" / 38 - 2" / 51 £200.001 1/8" / 28 5" / 127 1 1/2" / 38 - 2" / 51 £215.001 1/4" / 30 1 3/8" /35 6" / 125 1 3/4" / 43 - 2 1/4" / 58 £260.001 1/2" / 40 7" / 178 2" / 51 - 2 1/2" / 64 £405.001 5/8" or 1 3/4" / 45 7" / 178 2" / 51 - 2 1/2" / 64 £470.00WATER SCOOP OUTBOARD BEARING(Cutless fitted)To Order for shaft standard std. tube dia. "D" "E" std. bolt Std. Pricespecify "d" dia. "d" length "A" thread 12 t.p.i centresshaft dia. andsee NOTE* 7/8" / 22 4 1/2" / 144 1 1/2" / 38 4" / 102 £250.001" / 25 5" / 125 1 1/2" / 38 4" / 102 £250.001 1/8" / 28 5 1/4" / 135 1 3/4" / 45 4" / 102 £260.001 1/4" / 30 - 1 3/8" 35 6" / 150 1 3/4" / 45 4 1/2" / 114 £270.001 1/2" / 40 7" / 178 22 / 51 5" / 127 £385.001 5/8" or 1 3/4" / 45 7 1/2" 188 2 1/4" / 57 5" / 127 £405.00Stuart copy casting option - used as inboard flange £150.00 / used as outboard bearing housing with cutless £230.00GLASS-IN "P" BRACKETSfor shaft length "J" Pricedia. "d"3/4" / 20 10" / 250 £210.007/8" / 22 16" / 400 £225.001" / 25 16" / 400 £230.001 1/8" / 28 16" / 400 £235.001 1/4" / 30 16" / 400 £315.001 3/8" / 35 18" / 450 £420.001 1/2" / 40 18" / 450 £500.001 3/4" / 45 22" / 550 £750.002" / 50 22" / 550 £875.00Note: All prices are based on current costs, these may be ammended in the case of escalating material prices, please check before ordering.Jan. 2014 All prices listed are subject to UK VAT. Carriage and packing extra.5