BrightStor CA-1 Tape Management - SupportConnect
BrightStor CA-1 Tape Management - SupportConnect BrightStor CA-1 Tape Management - SupportConnect
New CBRUXVNLAlso new with this usermod is CBRUXVNL, the volume not-in-library exit. This exit will get control for EVERYtape mount not satisfied inside an SMS-managed robotic device, and for any non-tape (dasd) device that isnot currently online. The version that is supplied will do no processing by default. If you want to haveWTORs issued (asking the operator to re-insert a cartridge into the 3494 for example for non-vaulted 3590cartridges); then you will need to modify the CL05244 usermod (un-comment out some compares andbranches and comment-out some others). Once the CL05244 usermod to the CTSUXnnn exits have beenapplied, simply re-apply the SMPEOAM usermod to install the new version in SYS1.LINKLIB and refresh theexit to OAM.Thank you for your continued support of Computer Associates and its products. If you have any questionsabout this Product Information Bulletin or any other questions about this product, please contact your localComputer Associates Technical Support organization.PDC#: QI15007
- Page 1 and 2: BrightStor CA-1® Tape ManagementPr
- Page 3: This Product Information Packet con
- Page 6 and 7: Blocked TMC SupportUpdated versions
- Page 8 and 9: 3. Non CA-Activator ConsiderationsT
- Page 11 and 12: BrightStor CA-1 Product Error Alert
- Page 13: BrightStor CA-1 Product Error Alert
- Page 16 and 17: IMPACT:Tapes may be re-labelled ina
- Page 18 and 19: Samples:1. If an EDM uses program p
- Page 21 and 22: BrightStor CA-1 Product Documentati
- Page 23: User Response: This normally occurs
- Page 26 and 27: Sharing an unblocked TMC between sy
- Page 28 and 29: Documentation updates related to th
- Page 30 and 31: Add the following message instead:I
- Page 33 and 34: BrightStor CA-1 Product Documentati
- Page 35: CA-1 Product Documentation ChangeDA
New CBRUXVNLAlso new with this usermod is CBRUXVNL, the volume not-in-library exit. This exit will get control for EVERYtape mount not satisfied inside an SMS-managed robotic device, and for any non-tape (dasd) device that isnot currently online. The version that is supplied will do no processing by default. If you want to haveWTORs issued (asking the operator to re-insert a cartridge into the 3494 for example for non-vaulted 3590cartridges); then you will need to modify the CL05244 usermod (un-comment out some compares andbranches and comment-out some others). Once the CL05244 usermod to the CTSUXnnn exits have beenapplied, simply re-apply the SMPEOAM usermod to install the new version in SYS1.LINKLIB and refresh theexit to OAM.Thank you for your continued support of Computer Associates and its products. If you have any questionsabout this Product Information Bulletin or any other questions about this product, please contact your localComputer Associates Technical Support organization.PDC#: QI15007
Change language