Original Line Cylinders - PW Romex

BimbaOriginal Line – Stainless Steel Body Air CylindersNose Mount Torque ValuesThreadSizeTorque(IN*LB) FT*LBBore Size1/4-28 UNF (27.6) 2.3 5/16" (007)3/8-24 UNF (60) 5 5/16" (007) &7/16" (01)7/16-20 UNF (84) 7 7/16" (01) &9/16" (02)1/2-20 UNF (144) 12 3/4" (04)5/8-18 UNF (336) 28 3/4" (04), 7/8" (06) &1-1/16" (09)3/4-16 UNF (480) 40 3/4" (04), 1-1/16" (09), 1-1/4" (12) &1-1/2" (17)7/8-16 UNF (780) 65 1-1/16" (09), 1-1/4" (12) &1-1/2" (17)1-14 UNS (1200) 100 1-1/2" (17) &1-3/4" (24)11/8-12 UNF (1320) 110 1-1/2" (17) &1-3/4" (24)11/4-12 UNF (1440) 120 2" (31)13/8-12 UNF (1560) 130 2-1/2" (50)11/2-12 UNF (1680) 140 3" (70)PressureRatingOriginal Line, Cushioned Original Line, NR series, Z-line, MRS and hole punchers =250 psi.PC cylinder =100 psi.Bimba 500 Hydraulic =500 psi hydraulic.Reservoirs =250 psi.Switch Track OptionsFor Original Line cylinders, including MRS cylinders, with -T2, T3, and T4 optionsOPTION T2.29OPTION T31.25mm(.050in)OPTION T4.23Switch Track for use with Bimba MR, MS, MSC, and MSK SwitchesMiniature Position Sensing track lengths can now bepurchased separately for field mounting of custom tracklocations.Simply specify the length of track desired after the part number.Mounting recommendations:Bores Part Number List Price Adder per Inch• Clean body with acetone. Remove all oil frombody surface.007 -04 D-74168-A-length $2.90$1.05• Avoid mounting track over rolled construction. 06 -31 D-78527-A-length 2.901.15Locate edge of track 0.175" from rolled50 -70 D-78528-A-length 2.90 1.35construction.Loctite U-05FL or similar adhesive isrecommended (not included).• Use asolid continuous bead of glue for theentire length of track used. Bead should fill center channel of track.• Adhere to recommended cure times as specified by the glue manufacturer.1.9ForTechnical Assistance: 800-442-4622