Original Line Cylinders - PW Romex

Three-Position Original Line CylindersBimba’s Three-Position Original Line stainless steel bodycylinder provides three positions with asingle cylinder.Bimba offers the performance and quality of the unitizedOriginal Line cylinder design along with it’s product breadthnow in three positive stroke positions.The model number for all Three-Position Original Line cylindersconsists of three alphanumeric clusters.These designateproduct type, bore size and stroke length, and options.Pleaserefer to the charts below for an example of model numberProduct TypeBlank –Three-positionOriginal LineM–Magnet option forcylinders*NR –Non-rotating rod option*Magnet located onstroke Bpiston only.Mounting OptionsD–Double acting, nose mountDXP –Double acting, universal mountBore Sizes02 –9/16"04 –3/4"09 –1-1/16"17 –1-1/2"31 –2"Note: Consult page 1.4 for option combination compatibility.How toOrderM-043/4.5-DW. This is a3/4" bore, with a3"stroke for positionA, plus an additional 4-1/2" stroke for position B, double actingcylinder with arod wiper.Stroke A Stroke B Standard Stroke Lengths and StrokeMaximums0.5 =1/2" 0.5 =1/2" Nose Mount1=1" 1"=1" 1"increments to 12"1.5 =2-1/2" 2.5 =2-1/2" 2xStroke A+Stroke BMaximum =12"3.75 =3-3/4" 3.75 =3-3/4" Universal Mountetc. etc. 1" increments to 24"M - 043 /4.5 - D W2xStroke A+Stroke BMaximum =32"Options(Enter in alphabetical order, except EE which is last)B–BumpersE–Non-lube seals and lubricationF–Molycoated bodyG–Magnalube ® GK–Ports rotated 90degreesN–Low temperature seals &lubricationNT –Non-threaded rodQ–Side ported rear head (see standard Original Line informationfor applicable length adders by bore size)T–Switch Track (T2, T3 or T4), see Position Sensing Solutions,page 8.3 for switch selection informationV–High temperature seals &lubricationW–Rod wiperEEX.XX –Extra rod extensionSpecificationsExpected life: 1400 miles when lubricatedTotal stroke tolerance:9/16" –1-1/2" +.075/-.0402": +.095/-.060Operating Medium: Air onlyMaximum Operating Pressure: 250 psiTemperature Range: -20˚F to 200˚FStandard Lubrication: HT-99Endcaps, center section, and piston material: AluminumCylinder body: 304 stainless steelPiston and rod seals: Buna N“U” cupsRod and pivot bushings: Sintered bronzePiston rod: 303 stainless steel®Magnalube is aregistered trademark ofCarleton Stuart Corporation1.66