Original Line Cylinders - PW Romex

1-1/2" Bore Air Cylinders• Ground and Polished, High Strength Carbon SteelPiston Rod Standard –303 Stainless Steel RodOptional –Bronze Rod Guide Bushing Standard• Force Exerted Approximately 1.7 of Air LinePressure• Enclosed Spring Force: 7lbs. Relaxed –14lbs.Compressed• Rod Wipers Available on D, DP, DX, DXDE, andDXDEH Models□ Enter Stroke Length as 3rd Digit17□$26.10BASE PRICEAdd $4.15 per inch of strokeOPTIONS:NO CHARGE:• MAGNALUBE G(G)• PORTS ROTATED (K)** Front port rotated 90° on BF models.• NOTHREAD (NT)• SIDE PORTED REAR HEAD (Q)Add .19" to nose mount overall length and DNR; BF and BFTadd .38"• PIVOT BUSHING (Y).375" ID (use D-620-1 pivot bracket)SINGLE AND REVERSE ACTING BUMPERS (B)• $3.20 additional• Add .125" to overall lengthDOUBLE ACTING BUMPERS (B)• $5.00 additional• Add .125 to overall length*Front port rotated at 90° on BF model.EXTRA EXTENSION (EE)• Single, reverse and double acting, add $1.30 per inch ofextension• DXDE, add $2.00 per inch of extension; extension added toeach end• DXDE hollow rod, add $2.15 per inch of extension; extensionadded to each endDOUBLE ACTING FAILSAFE(JS =Spring Return, JR =Spring Extend)• Add $11.40 to base price + $1.55 to stroke adder• See page 1.65 for overall length addersHEAVY SPRINGS (H) are standard on all single acting blockfront and block rear mount, and all reverse acting and strokeadjust models.For all other single acting, add $2.25• Spring Force: 8.5 lbs. relaxed –17lbs. compressedMAGNET (prefix M) –Add $14.00• Single and reverse acting add .125" to overall length,• Stainless steel rod becomes standard with this option• Must specify track(s) for use with miniature position sensing(T2, T3, T4) –add $2.90 per track. See page 1.9 for tracklocation details. See Position Sensing Solutions, page 8.3 forswitch selection information.LOW TEMPERATURE (N)Temperature Range: -40° to 200ºF• Single acting add $1.25• Reverse acting add $1.60• Double acting add $2.45• DXDE add $3.05HIGH TEMPERATURE “U” CUPS (V)Temperature Range: 0° to 400ºF (-18° to 205ºC)• Single acting add $5.75• Double acting add $14.30• DXDE add $18.30• Reverse acting add $9.85ROD WIPER (W) (not available in standard single acting nowavailable in block mount)• Double acting add $2.90• DXDE add $5.80MOLYCOATED BODY (F)• Add $2.70 per inch of strokeNON-LUBE SERVICE (E)• Single acting add $4.55• Double acting add $10.15• DXDE add $13.95OPTIONS continued…STAINLESS STEEL ROD (prefix SR)• Add $3.00• Standard on DX, DXDE, DXDEH, DNR, DXNR, All blockmounts, and MoptionLOW PRESSURE HYDRAULIC (HL)• 250 psi maximum• Double acting models only• Option specified as aprefix• Add $18.00MODEL/PRICE DESCRIPTION/WEIGHT (lbs.) DIMENSIONSSingle Acting –Spring Return –Front Nose MountingStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4"Maximum Stroke –6"Optional Stainless Steel RodOptional Accessory:D-241 Mounting BracketBase Weight: .44Adder Per Inch of Stroke: .22Standard AirCylindersThree-PositionCylindersCushionCylindersMRS®CylindersNon-RotatingCylindersPCCylindersAll StainlessNon-RepairableAll StainlessRepairableZLine AirCylindersRod LockCylinders17□ -NR$28.75BASE PRICEAdd $4.15 per inch of strokeSingle Acting –Non-rotatingHexagon Rod –Spring Return –Front Nose MountingStandard Stroke Lengths:1⁄2 ", 1", 1 1 ⁄2 ", 2", 2 1 ⁄2 ", 3", 4"Maximum Stroke –6"Optional Stainless Steel RodOptional Accessory:D-241 Mounting BracketBase Weight: .45Adder Per Inch of Stroke: .22See page 1.8 for length calculation of fractional stroke for single acting cylindersAll prices are F.O.B. Monee, Illinois and are subject to change without notice 1.45 ForTechnical Assistance: 800-442-4622500 HydraulicCylindersHole PunchCylinders